Export limit exceeded: 24722 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 24,722

Export CSV
CVE-2026-99400

xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value

In the Linux kernel, the following vulnerability has been resolved: xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value xfs_attr_copy_value() takes the value length as a signed int and, for a remote xattr, is handed args->rmtvaluelen. That field is filled from the on-disk __be32 xfs_attr_leaf_name_remote.valuelen in xfs_attr3_leaf_getvalue(), so a crafted length such as 0x80000000 is stored into the signed rmtvaluelen as a negative number. The "buffer too small" guard in xfs_attr_copy_value() is a signed comparison: if (args->valuelen < valuelen) return -ERANGE; A negative valuelen therefore compares as smaller than the caller's buffer size, skips the -ERANGE path, and is then used as a copy length, leading to an out-of-bounds copy of a full remote block into a small getxattr(2) buffer on a mounted crafted image. Reject a value length that is negative or larger than the maximum xattr size before it is used, so a bogus on-disk length can no longer slip through the value copier.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99412

xfs: avoid cross-rtgroup reaping after a repair

In the Linux kernel, the following vulnerability has been resolved: xfs: avoid cross-rtgroup reaping after a repair LOLLM notices that the extents stored in a xrtb_bitmap (aka xfs_rtblock bitmap) can span multiple rtgroups due to two circumstances. The first is that the size of an rtgroup is an exact power of two, which means that rtgroups are adjacent in the segmented xfs_rtblock_t address space. This is fairly common to reduce the amount of multiplication and division needed to handle space on the rt volume. The second is that (unlike in the original rtgroups design), rtgroups do not have fixed-location metadata like AGs do, which means that there's nothing to force a break between rtgroups. Therefore, we must loop through the rtgroups in xreap_rtmeta_extent to avoid running off the end of an rtgroup while reaping.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99413

xfs: fix buffer overruns in xfs_ioc_attr_list

In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99430

ocfs2: fix chunk number of the first chunk in a local quota file

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix chunk number of the first chunk in a local quota file Mounting a crafted OCFS2 image can corrupt kernel memory. When the local quota file header of such an image claims zero chunks, the first quota entry allocated during the mount gets a chunk number taken from a kernel pointer, and releasing that entry clears a bit far outside the chunk bitmap. The write will corrupt the data stored at that address, and the corruption may lead to a system crash or damage unrelated data. Mounting requires CAP_SYS_ADMIN, so it takes an untrusted image, such as removable media or a loop mount of a file from elsewhere. Since the chunk number comes from a kernel pointer, the address of the bit that gets cleared differs from boot to boot, and the issue has been reported under several titles: - BUG: unable to handle kernel paging request in ocfs2_local_release_dquot - KASAN: use-after-free Write in ocfs2_local_release_dquot - KASAN: slab-out-of-bounds Write in ocfs2_local_release_dquot - KASAN: slab-use-after-free Write in ocfs2_local_release_dquot - KFENCE: use-after-free write in ocfs2_local_release_dquot Note that none of these is a use-after-free in the quota code: the chunk and its buffer head are alive. The bit that gets cleared lies far outside the bitmap. KASAN and KFENCE name each report based on the object occupying that address, which explains why the same issue is reported under so many different titles. In the report I sent, the address fell in a free page, which KASAN labels use-after-free. There are known reproducers. Both a syzkaller and a C reproducer are available from the Google Drive link [1] in my report thread. The issue was found by our modified syzkaller, not a theoretical thing found by an LLM. I have not seen it outside fuzzing, so it is not affecting me in the real world. The local quota file in OCFS2 is divided into chunks, and each chunk begins with a header block holding a bitmap of the quota entries that chunk has handed out. Chunks are numbered from zero, and that number is used to convert the file offset of an entry back into a bit position in the bitmap. ocfs2_local_quota_add_chunk() appends a new chunk to the in-memory list and numbers it one past the chunk that was last: list_add_tail(&chunk->qc_chunk, &oinfo->dqi_chunk); chunk->qc_num = list_entry(chunk->qc_chunk.prev, struct ocfs2_quota_chunk, qc_chunk)->qc_num + 1; The predecessor is looked up after the new chunk is added to the list, so if the list was empty, the prev pointer is the list head itself. The head is the dqi_chunk member of struct ocfs2_mem_dqinfo and is not a chunk, so reading qc_num through it lands 16 bytes past the start of the head, on the dqi_gqinode pointer that follows it. The first chunk of the file is then numbered with the lower half of a kernel pointer instead of 0. The list is empty when the local quota file header claims the file has no chunks. ocfs2_local_read_info() takes dqi_chunks from that header without validating it, so an image with dqi_chunks == 0 takes this path when the first quota entry is allocated. ocfs2_create_local_dquot() turns the bad number into a file offset with ol_dqblk_off(), which shifts a 32-bit block number left by the block size bits, so the top bits of such a large block number are lost. ocfs2_local_release_dquot() turns the offset back into a bit index with ol_dqblk_chunk_off(), using the full chunk number, so the lost bits push that index far outside the bitmap, and clearing it corrupts unrelated memory. Compute the chunk number before putting the chunk on the list, and use 0 when the list is empty.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99674

can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99454

staging: rtl8723bs: fix protected RX frame validation in decrypt path

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix protected RX frame validation in decrypt path The RX software decrypt path mishandles crafted protected frames from a malicious AP in two ways: 1) decryptor() never checks that a protected frame is long enough to hold the 802.11 header plus the per-cipher trailer. All of rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute length = hdr.len - hdrlen - iv_len; and act on the result, and recvframe_chkmic() similarly computes datalen = hdr.len - hdrlen - iv_len - icv_len - 8; for TKIP (the 8-byte Michael MIC is not accounted for in icv_len). A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows these unsigned subtractions, turning into a ~4 GiB iteration count in aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le() length, causing out-of-bounds reads/writes of up to ~4 GiB starting from the rx skb. Reject such frames in decryptor() before touching the IV; this covers all three ciphers and the TKIP MIC check, and also keeps the unconditional iv[3] access within the frame. 2) validate_80211w_mgmt() keeps using the frame - two memcpys through the stale rx_data pointer and a pkt_len update - before checking whether decryptor() returned NULL. On decrypt failure (e.g. a unicast protected deauth/disassoc/action frame with a bad MIC, which this path always software-decrypts) the skb has already been freed, so this is a use-after-free read/write, and the caller's error path frees the frame a second time, drifting free_recvframe_cnt. Bail out immediately when decryptor() fails, freeing the temporary mgmt_DATA buffer first. Discovered by Atuin - Automated Vulnerability Discovery Engine.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129538

PHP-CGI out-of-bounds read and write during PATH_INFO correction

PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 6.9 Medium EPSS 12.8% KEV · Not listed
Vendors
Products
CVE-2026-99483

ALSA: pcmtest: handle multiple wraps in random capture fill

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99487

rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML

In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99544

Drivers: hv: vmbus: Bounds check the shared ring buffer indices

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Bounds check the shared ring buffer indices In a CoCo VM the host is untrusted. Since the VMBus ring buffer read and write indices live in shared memory, the guest has to treat both as potentially malicious. hv_ringbuffer_write() copies into the ring at write_index with no bounds checking, so the host can make the guest write packet data at any offset up to 4 GiB past the start of the ring buffer. read_index matters too: the available space derived from both indices is the only bound on how much is copied, and an out-of-range index can make it far larger than the ring. The fix is to validate both indices before use and to use the validated snapshot instead of re-accessing. For invalid indices, hv_ringbuffer_write() logs and returns -EIO. One re-read of write_index is left unchecked in this patch: hv_get_ring_bufferindices() fetches it again for the prev_indices trailer. The value is only returned to the host and is not used as an offset or length for indexing. Since this is not a security issue, it is addressed later in the series. Open-coding the bytes available arithmetic keeps the fix free of prerequisites; a later patch refactors it into a helper function.

CVSS 3.1 · 6.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99554

net: usb: pegasus: do not advance rx_skb->data on dropped frames

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: do not advance rx_skb->data on dropped frames For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive header by advancing pegasus->rx_skb->data in place. This is done before the pkt_len > PEGASUS_MTU check, and when that check drops the frame the good path resubmits the same skb with the advanced rx_skb->data as the transfer buffer, still PEGASUS_MTU bytes long. Every frame with an oversized length field therefore moves the receive buffer two more bytes towards the end of the skb data area. A device that keeps sending such frames makes the host controller write received data over skb_shared_info and past the end of the allocation, and the corrupted skb_shared_info is used when the skb is eventually freed. With an emulated device sending frames filled with 0x5a on a KASAN kernel: BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd] Write of size 1536 at addr ffff888105821202 by task swapper/1/0 ... Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67] RIP: 0010:skb_release_data+0x36f/0x800 Only skip the header with skb_reserve() once the frame is going to be passed up, so the receive buffer always starts at the beginning of the skb data area. Unlike the old pointer adjustment, skb_reserve() also moves skb->tail, so the two header bytes now count against the buffer size: lower the length limit for the 0x8513 accordingly, otherwise a pkt_len of PEGASUS_MTU - 1 or PEGASUS_MTU would trip skb_over_panic(). Found by code review with LLM assistance and reproduced with an emulated USB device (raw-gadget + dummy_hcd).

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62257

HTSlib: Heap read and write overflow in HTSlib CRAM 4.0 decoder

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 XPACK and XRLE decoders cache expanded block pointers at indexes beyond the 512-element slice->block_by_id array. An array index partially controlled by data in the input file first causes an out-of-bounds read to determine whether a block is cached; a null value then causes allocation of a block and an out-of-bounds pointer write to the same element. The invalid read may crash the process, while the write may corrupt heap state and could permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123007

NGINX ngx_http_v2_module vulnerability

This issue affects NGINX Plus or NGINX Open Source configurations that use HTTP/2. When NGINX processes undisclosed traffic, the flow control window can exceed the allowed threshold, potentially resulting in a heap buffer overflow typically followed by an NGINX worker segmentation fault. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: An attacker could leverage this vulnerability to crash the NGINX worker process, corrupt its memory, or potentially execute code remotely. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CVSS 4.0 · 9.2 Critical EPSS 29.9% KEV · Not listed
Vendors
CVE-2026-62256

HTSlib: Heap write overflow in HTSlib FASTA index handling

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, fai_retrieve does not verify that the line width recorded in a FASTA .fai index is greater than or equal to the number of bases per line. When the line width is exactly one less than the base count, retrieval allocates an undersized heap buffer and writes one byte beyond its end; larger discrepancies instead cause an allocation failure that is handled. This issue can corrupt heap memory and crash the process. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99604

drm/etnaviv: Flush the tile status cache through both the PE and BLT

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Flush the tile status cache through both the PE and BLT Since commit f232d9ec029c ("drm/etnaviv: fix TS cache flushing on GPUs with BLT engine"), jobs on GPUs with a BLT engine use a BLT command to flush the tile status cache instead of TS_FLUSH_CACHE, which is broken on most of these GPUs. GC7000 r6008/r6009 and GC8200 r6401 are the other way around: TS_FLUSH_CACHE works, but the BLT command does not flush the cache. The vendor driver handles these GPUs using TS_FLUSH_CACHE, but the etnaviv kernel driver has no way to identify them. As a result, dirty tile status cache lines survive the end of a job. They are written back by the next cache flush, using the page table of the job issuing it. If that job belongs to another process, the write goes to the wrong address space. On GC7000 r6009 this causes MMU faults and GPU recoveries blamed on an innocent process. I see around 1100 per run of a multisample depth/stencil test running alongside two other GPU clients. Emit both flushes at the end of every job on GPUs with a BLT engine. Whichever does not work on a given GPU is a no-op. Since dirty lines are only written back once, this costs one additional state load per job.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99686

vhost: fix used ring index wrap in vhost_add_used_n_in_order

In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1).

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99638

net/sched: clamp skb->queue_mapping before indexing the tx queue

In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99623

drm/amdgpu: Clamp the ATIF backlight curve to its 99 points

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Clamp the ATIF backlight curve to its 99 points amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points as data_points but copies only the 99 points that luminance_data[] holds. number_of_points is a u8, so a firmware table that claims more makes the custom curve code in amdgpu_dm index past the array, and dm_query_extended_brightness_caps() copy past the end of the data_points[] buffer it fills Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table that claims more is a firmware bug (cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072)

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84838

Rpm: command injection in rpmuncompress via unescaped filenames passed to popen()

A flaw was found in rpmuncompress. This command injection vulnerability allows a local attacker to execute arbitrary commands. This occurs when rpmuncompress processes a specially crafted archive filename containing shell metacharacters, which are not properly escaped before being passed to shell command strings. Successful exploitation requires user interaction, where a user or automated workflow invokes rpmuncompress on the malicious file, leading to high impact on the confidentiality, integrity, and availability of data accessible to the invoking user.

CVSS 3.1 · 7.8 High EPSS 1.1% KEV · Not listed
Vendors
CVE-2026-84233

Rpm: command execution via macro expansion in `rpmuncompress -x` for crafted `.gem` filenames

A flaw was found in rpm. A local attacker could supply a specially crafted `.gem` filename containing RPM macro syntax. When a user or automated workflow invokes `rpmuncompress -x` on this file, the macro expansion occurs during command construction. This allows the attacker to execute arbitrary commands with the privileges of the invoking account, leading to a compromise of confidentiality, integrity, and availability.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors