Export limit exceeded: 29612 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 29,612

Export CSV
CVE-2026-77685

Bluetooth Classic RFCOMM: integer underflow in the MCC TEST command handler leads to out-of-bounds read disclosed to the peer and out-of-bounds write

The RFCOMM multiplexer control-channel handler in subsys/bluetooth/host/classic/rfcomm.c computed the echo length for a BT_RFCOMM_TEST command as buf->len - 1 and passed it to rfcomm_send_test(), whose length parameter is a uint8_t. A malformed but FCS-valid UIH frame on DLCI 0 can leave buf->len == 0 after rfcomm_handle_msg() pulls the two-byte MCC header, so buf->len - 1 underflows and narrows to 255. rfcomm_send_test() then copies 255 bytes out of a receive buffer that holds no remaining valid data, and appends them to an outgoing L2CAP PDU allocated with only CONFIG_BT_L2CAP_TX_MTU (253 by default for CONFIG_BT_CLASSIC) bytes of tailroom. The source read runs past the end of the ACL receive buffer into adjacent buffers of the same net_buf pool, and the destination copy overruns the transmit buffer by about eight bytes; net_buf_add_mem() performs no runtime bounds check in ordinary builds, where the underlying __ASSERT_NO_MSG() is compiled out. The trigger is a single five-byte RFCOMM frame on the multiplexer control channel, which is processed as soon as the L2CAP channel for PSM 3 is established — before any DLC exists and independent of RFCOMM session state. bt_rfcomm_init() registers that L2CAP server with .sec_level = BT_SECURITY_L1, which l2cap_br_conn_security() accepts without any link key from a peer that does not claim host Secure Simple Pairing support, so an unpaired BR/EDR device in radio range of a connectable target with CONFIG_BT_RFCOMM enabled (SPP, HFP, HSP, GOEP and similar profiles all enable it) can reach the defect. The resulting 255-byte TEST response is transmitted back to the attacker, disclosing roughly 255 bytes of adjacent stack/pool memory — including the contents of neighbouring receive buffers, which an attacker can prime with earlier packets — and the accompanying out-of-bounds write corrupts memory following the transmit buffer, which can crash the Bluetooth host. The request is trivially repeatable, so both the disclosure and the corruption can be driven at will. Two fixes are needed, and the first on its own does not close the out-of-bounds write. Fix 1 (0040ef781e1d, #115768) strips the FCS byte in rfcomm_recv() and echoes buf->len, rejecting anything over UINT8_MAX, which removes the underflow and the over-read. But rfcomm_make_uih_msg() still allocates the response with bt_l2cap_create_pdu() and never compares the requested length with the buffer's tailroom, so a well-formed TEST command carrying a pattern of about 248 bytes or more still builds a response (3-byte frame header, 2-byte message header, pattern, FCS) larger than the 253 bytes available. A pattern that long can only be received when the RFCOMM L2CAP receive MTU (CONFIG_BT_RFCOMM_L2CAP_MTU, which defaults to CONFIG_BT_BUF_ACL_RX_SIZE) exceeds CONFIG_BT_L2CAP_TX_MTU. The plain BR/EDR defaults (200 against 253) cannot reach it, but from v4.3.0 enabling CONFIG_BT_GOEP raises CONFIG_BT_BUF_ACL_RX_SIZE to 264 (265 from v4.4.0), so GOEP builds with only fix 1 applied still overrun the transmit buffer by up to eight bytes. This includes v4.3.2, the last v4.3 release, which carries fix 1 but will not receive fix 2. Fix 2 (214530895dd3, #118293) checks the tailroom on every RFCOMM PDU allocation and closes this residual write.

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-47259

BACnet Stack: Stack-based buffer overflow in Notification Class RemoveListElement recipient-list decoding

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a RemoveListElement request targeting Notification-Class.recipient-list can trigger a stack-based out-of-bounds write in the current master branch when the request contains more than NC_MAX_RECIPIENTS valid BACnetDestination elements. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-45265

Atomic-Read-File RecordCount Stack-Based Out-of-Bounds Write in bacnet-stack

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-54503

Improper Handling of Overlapping Protected Memory Ranges in SEV Firmware Leading to Integrity Loss

Improper handling of overlap between protected memory ranges in the Secure Encrypted Virtualization (SEV) firmware could allow a privileged attacker to cause misconfigurations in the RMP potentially resulting in loss of integrity.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2025-54507

Improper Validation of Input in AMD SEV Firmware Allows Multiple RMP Entries, Compromising Guest Integrity

Improper validation of consistency within input in AMD SEV (Secure Encrypted Virtualization) firmware could allow an attacker with administrative privileges to create multiple RMP entries for the same guest physical address, potentially resulting in loss of guest integrity.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2025-54504

Insufficient Granularity of Access Control in AMD Secure Encrypted Virtualization (SEV) firmware could allow an attacker with administrative privileges attacker to write to a trusted region used by AMD Secure Encrypted Virtualization-Encrypted State (SEV-ES), potentially resulting in loss of integrity.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2025-0027

Improper access control in AMD SEV firmware allows malicious hypervisor to bypass RMP protections

Improper access control in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to bypass Reverse Map Table (RMP) protections, potentially impacting the integrity of Secure Encrypted Virtualization-Secure Nested Paging (SEV-SNP) guest memory.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2026-64667

pam_usb: Heap out-of-bounds read in pusb_get_tty_from_display_server cmdline scan

pam_usb provides hardware authentication for Linux using removable media. Prior to version 0.9.3, src/local.c (pusb_get_tty_from_display_server) allocates a 4096-byte cmdline buffer, reads up to 4096 bytes from /proc//cmdline, then replaces every NUL separator with a space. When read(2) returns exactly 4096 bytes for any process the function inspects, the buffer ends without a terminator and the subsequent strstr() calls scan past the allocation boundary. The function is invoked during normal PAM authentication when DISPLAY is set, so the read fires for every process at auth time. Consequences are bounded: strstr output is a Boolean substring match (limited info-disclosure surface) but a hostile heap layout can produce a SIGSEGV that terminates the host PAM process. This issue has been patched in version 0.9.3.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-59593

AV1 Decoder Heap Buffer Overflow Enables Local Privilege Escalation

In tile_info of av1_decoder, there is a possible Heap Buffer Overflow due to a heap buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-59594

In spm_alloc of encoder, there is a possible Heap Buffer Overflow due to a heap buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-59628

Out-of-Bounds Read in Android Video Decoder Leading to Local Information Disclosure

In s_copy_host_apb_param of multiple files, there is a possible way to trigger an out of bounds read in the video decoder command queue due to a logic error. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.

CVSS 3.1 · 4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-121047

chromium-browser: Buffer overflow in Media

Buffer overflow in Media in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-47710

BACnet Stack: Loop reference to long Structured View description causes stack-buffer-overflow

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-47711

BACnet Stack: Stack buffer overflow in Loop internal ReadProperty path via Life_Safety_Zone.accepted-modes on the default BACnet/IP server

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, the current master demo server can be crashed remotely over BACnet/IP by sending a valid Confirmed WriteProperty request that updates loop-1's controlled-variable-reference to point to life-safety-zone-1 / accepted-modes. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46674

BACnet Stack: Out-of-Bounds Read in AtomicWriteFile Record Decoder via Unbounded returnedRecordCount

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, an out-of-bounds read vulnerability exists in bacnet-stack's AtomicWriteFile record-access path. The bug is caused by a mismatch between an externally controlled returnedRecordCount field and the fixed-size internal fileData[] array used by BACNET_ATOMIC_WRITE_FILE_DATA. This issue has been patched in versions 1.4.4 and 1.5.1.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46677

BACnet Stack: Client-Side Out-of-Bounds Read in AtomicReadFile-ACK Record-Access Handling via RecordCount / fileData[] Mismatch

BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126223

A stack-based buffer overflow vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.0 through 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow an authenticated administrator to execute unauthorized code or commands or cause a denial of service via specially crafted JSON-RPC requests.

CVSS 3.1 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-127099

Sssd: sssd: stack buffer overflow during rsa certificate-to-ssh key conversion

A flaw was found in SSSD's conversion of X.509 certificate RSA public keys to SSH keys. Missing size checks before copying RSA components into fixed-size stack buffers can cause a stack buffer overflow. An attacker able to supply a certificate with oversized RSA components that passes the configured certificate checks can cause denial of service and corrupt SSH responder memory.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-64540

usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()

In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup() genelink_rx_fixup() splits an aggregated RX frame into its individual packets, using a per-packet length taken from device-supplied data. That length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared against how many bytes were actually received. A malicious GeneLink (GL620A) device can therefore send a short URB whose header claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size); then copies past the end of the receive buffer and hands the adjacent slab contents up the network stack, an out-of-bounds read that leaks kernel heap. No privilege is required: the path runs in the usbnet RX softirq as soon as the interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... skb_pull() already verifies that the requested length fits the buffer and returns NULL otherwise. Move it ahead of the copy and check its result, so a packet that overruns the received data is rejected before it is read. Well-formed frames, whose packets are fully present, are unaffected.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products