Export limit exceeded: 12980 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 29606 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search vulnerabilities

Results 29,606

Export CSV
CVE-2026-99565

ksmbd: wait for negotiation before receiving another PDU

In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99721

hwmon: (aquacomputer_d5next) reject short status reports

In the Linux kernel, the following vulnerability has been resolved: hwmon: (aquacomputer_d5next) reject short status reports The HID raw_event callback runs before HID core validates the received report length. aqc_raw_event() reads device-specific status fields at fixed offsets, including multi-byte values, without first ensuring that the received buffer contains every field. A truncated report can therefore cause out-of-bounds reads and update hwmon state with unrelated data. The required length differs between supported devices and cannot be derived from the HID report descriptor. Define the minimum length needed by each asynchronous status format, select it while configuring the device, and reject reports that do not contain the last field accessed by that format. Keep the published length zero until probe configuration is complete, which also excludes legacy devices whose status is retrieved through feature reports.

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132141

DrayTek Vigor2960 Jsonstatus mainfunction.cgi json_load_lock stack-based overflow

A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6. Affected by this issue is the function json_load_lock of the file /cgi-bin/mainfunction.cgi of the component Jsonstatus. The manipulation of the argument usefile results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. It is advisable to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported."

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-132131

@fastify/middie vulnerable to path-scoped middleware bypass via array mount-path type confusion

@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions 8.3.0 through 9.3.6, the internal helper that normalizes a path-scoped middleware's mount path only handles string inputs, but the use method also accepts an array of mount paths and passes it through unchanged, so the normalization silently does nothing. As a result, a trailing slash on an array element survives into the generated route-matching regular expression, and an element that is exactly the root path, meaning a catch-all mount, is dropped entirely. Requests to subroutes of the affected mount paths then skip the path-scoped middleware, such as authentication, authorization, or rate limiting, while Fastify's router still dispatches them to the handler, allowing an unauthenticated client to reach protected routes. Applications are affected when they mount middleware on an array of paths in which an element ends with a slash, including one introduced by a plugin prefix that ends with a slash, or is exactly the root path. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, and avoid array mount paths with a trailing slash element for security relevant middleware.

CVSS 3.1 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-62257

HTSlib: Heap read and write overflow in HTSlib CRAM 4.0 decoder

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 XPACK and XRLE decoders cache expanded block pointers at indexes beyond the 512-element slice->block_by_id array. An array index partially controlled by data in the input file first causes an out-of-bounds read to determine whether a block is cached; a null value then causes allocation of a block and an out-of-bounds pointer write to the same element. The invalid read may crash the process, while the write may corrupt heap state and could permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99679

xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks

In the Linux kernel, the following vulnerability has been resolved: xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not check the extents against its layouts. xfs_iomap_write_unwritten() then allocates written blocks there. A large hole overruns the block reservation and shuts XFS down. A small one exposes stale data. Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131854

Ettercap before 0.8.5.2 Heap Out-of-Bounds Read via MySQL Dissector

Ettercap before 0.8.5.2 contains a heap out-of-bounds read vulnerability in dissector_mysql() in src/dissectors/ec_mysql.c that copies seed and password bytes without bounds checks. A malicious MySQL server or client can send truncated greeting or login packets to leak adjacent heap memory through hex-encoded output in the interface and log.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Products
CVE-2026-131853

Ettercap before 0.8.5.2 Heap Out-of-Bounds Read via SSHv1 Dissector

Ettercap before 0.8.5.2 contains a heap out-of-bounds read vulnerability in dissector_ssh() in src/dissectors/ec_ssh.c that copies a peer-supplied data_len without checking remaining packet bytes. A malicious SSHv1 client or server in an intercepted session can send a short packet with a large data_len to disclose up to 64 bytes of adjacent heap memory through captured credentials in the interface and log.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-125406

Ettercap before 0.8.5.1 Stack Buffer Underwrite via Telnet Dissector Backspace Handling

Ettercap before 0.8.5.1 contains a stack buffer underwrite vulnerability in the telnet dissector in src/dissectors/ec_telnet.c that decrements the output pointer on backspace without a lower bound check. Attackers can send a telnet stream with more backspaces than preceding characters to write below the stack buffer, corrupting the stack of the Ettercap process that normally runs as root.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Products
CVE-2026-125405

Ettercap before 0.8.5.1 Out-of-Bounds Read via HTTP NTLM Authentication Parsing

Ettercap before 0.8.5.1 contains an out-of-bounds read vulnerability in Parse_NTLM_Auth() in src/dissectors/ec_http.c due to unvalidated NTLM message offsets. Attackers can send a crafted HTTP Authorization header observed by Ettercap to read beyond the buffer, disclosing memory or crashing the process.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-125403

Ettercap before 0.8.5.1 Out-of-Bounds Read via sslw_remove_sts

Ettercap before 0.8.5.1 contains an out-of-bounds read and size_t underflow vulnerability in sslw_remove_sts() in src/ec_sslwrap.c, caused by a stale length and an unchecked memmem() result when stripping Strict-Transport-Security headers. A malicious HTTPS server whose response passes through Ettercap's SSL interception can trigger out-of-bounds reads and memory corruption in the Ettercap process, which normally runs as root.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-125402

Ettercap before 0.8.5.1 Heap Out-of-Bounds Read via TLS SNI Parsing

Ettercap before 0.8.5.1 contains a heap out-of-bounds read vulnerability in sslw_get_clienthello_sni() in src/ec_sslwrap.c that trusts the unchecked 16-bit SNI length field. Network-adjacent attackers can send crafted TLS ClientHello messages during SSL interception to leak up to 64 KB of heap memory upstream or crash Ettercap.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-125401

Ettercap before 0.8.5.1 Heap Buffer Overflow via Gadu-Gadu Dissector

Ettercap before 0.8.5.1 contains a heap buffer overflow vulnerability in gg_get_version() in src/dissectors/ec_gg.c that writes up to 44 bytes into a 30-byte allocation. Remote attackers can send Gadu-Gadu traffic on TCP port 8074 with a crafted version field through a monitored network to corrupt heap memory in the Ettercap process, which normally runs as root.

CVSS 4.0 · 7.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-111274

unarr before 1.2.0 Heap Out-of-Bounds Read via zip_parse_extra_fields

unarr before 1.2.0 contains a heap-based out-of-bounds read in zip_parse_extra_fields() in zip/parse-zip.c due to an incorrect ZIP64 extra field length check. Attackers can supply a crafted ZIP archive with 0xFFFFFFFF sentinel values and a truncated ZIP64 record to read past the heap buffer and crash the process.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-100837

Edgeless Systems Contrast before 1.21.0 Credential Leak via Registry Suffix Matching

Contrast (Edgeless Systems) before 1.21.0 performs unanchored suffix matching when selecting per-registry configuration in the imagepuller. Config.registryFor strips a single trailing dot and then uses strings.HasSuffix(hostname, fqdn) without requiring a DNS label boundary, so a registry entry such as [registries."ghcr.io."] is also applied to any host whose name merely ends in that byte sequence, including attacker-registered domains such as evilghcr.io. When an image or layer is pulled from such a sibling domain, the imagepuller sends the configured Authorization header (basic auth, registry token, or identity token), trusts the configured custom CA bundle, follows the configured mirror, and honours insecure-skip-verify (disabling TLS verification) for that host. Image integrity is not affected, as image bytes remain pinned by digest in the policy and are validated after the pull. Configurations that use a leading dot (e.g., [registries.".example.registry"]) are unaffected.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-100836

Edgeless Systems Contrast before 1.21.0 Denial of Service via ciphertextContainer

Contrast before 1.21.0 contains a panic vulnerability in the transit-engine endpoint's ciphertextContainer.UnmarshalJSON function that fails to validate decoded ciphertext length before slicing. An authenticated workload with a valid mesh certificate can trigger a runtime panic by submitting a short base64-encoded ciphertext, causing log spam and request failures without crashing the process.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-62256

HTSlib: Heap write overflow in HTSlib FASTA index handling

HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, fai_retrieve does not verify that the line width recorded in a FASTA .fai index is greater than or equal to the number of bases per line. When the line width is exactly one less than the base count, retrieval allocates an undersized heap buffer and writes one byte beyond its end; larger discrepancies instead cause an allocation failure that is handled. This issue can corrupt heap memory and crash the process. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119528

Gimp: gimp: stack buffer overflow in psd image resource header loader

A flaw was found in GIMP. The PSD plug-in’s image resource header loader uses an incorrect destination size when copying a converted resource name into a fixed stack buffer. Opening a crafted PSD file can cause a stack-based buffer overflow, leading to a crash and potentially arbitrary code execution.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-129713

Stack-based buffer overflow in Danfoss AK-SM8xxA unauthenticated CGI handler

A stack-based buffer overflow in an unauthenticated CGI handler of the Danfoss AK-SM 8xxA Series controller allows remote attackers to send specially crafted HTTP/S POST requests, leading to memory corruption, webserver restart and hypothetically potential arbitrary code execution with webserver privileges. Authentication is not required to exploit this vulnerability.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-99608

ALSA: usx2y: Guard the playback copy

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged.

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products