Search vulnerabilities

Results 341

Export CSV
CVE-2026-99784

9p/xen: fix refcount leak in p9_xen_response() on wrong tag

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix refcount leak in p9_xen_response() on wrong tag p9_xen_response() looks up the request for an incoming reply with p9_tag_lookup(), which takes a reference on the returned p9_req_t. When the tag does not resolve to a request in REQ_STATUS_SENT, the function warns and continues the loop without dropping that reference, permanently leaking the p9_req_t and its msize buffers. The reply header, including the tag, is supplied by the backend, so a malicious or buggy 9P backend can leak kernel memory on every crafted response. Drop the reference before continuing.

CVSS 3.1 · 4.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-95825

Reference-count underflow in Zephyr network interface address removal releases an IP address that is still in use

net_if_ipv4_addr_rm() and net_if_ipv6_addr_rm() in subsys/net/ip/net_if.c unconditionally called net_if_addr_unref() on the target address. When an earlier removal could not complete because another subsystem still held a reference (the TCP stack takes one on the local address of every connection, in tcp_conn_new() and on connect()), the address is left in place with is_added cleared and is_used still set. A second removal of such an address decremented the reference count again, consuming a reference owned by that other holder. When it was the last one, the address slot was released, its NET_EVENT_IPV*_ADDR_DEL event fired, and the slot became reusable while the holder still believed it owned a reference. Every address lookup helper matches on is_used and not on is_added, so a half-removed address stays visible to the rest of the stack and repeat removals are readily reachable from remote input. Under IPv6 SLAAC, an on-link node that sends a Router Advertisement with a short valid lifetime causes the address to expire into the deferred state; a refreshing Router Advertisement is handled by net_if_ipv6_addr_update_lifetime(), which re-arms the lifetime timer without restoring the reference, so the next expiry performs the second, reference-stealing removal. With CONFIG_NET_IPV4_ACD and DHCPv4, repeated spoofed ARP conflicts for the device's lease drive dhcpv4_acd_event_handler() into calling net_if_ipv4_addr_rm() more than once on the same address. Where CONFIG_USERSPACE is enabled, the net_if_ipv4_addr_rm_by_index() and net_if_ipv6_addr_rm_by_index() system calls let an unprivileged user-mode thread trigger the same kernel-side release deterministically. The impact is loss of a configured IP address while connections are still using it, and a corrupted reference count that propagates: the slot can be handed to a newly added address, and when the stale holder later tears down, net_if_addr_unref() resolves the address by value and drops the new incarnation's only reference, removing a live address a second time. The affected objects are static array slots and the counter is never decremented below zero, so there is no memory corruption or information disclosure; the consequence is denial of service against the device's network connectivity, repeatable at the attacker's pace. The fix resolves the address before touching the reference count and returns false without calling net_if_addr_unref() when the address is already marked as removed, so the public removal API can no longer consume a reference it does not own.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99322

ksmbd: rebind completed CREATE replays without draining the old channel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99668

mm/huge_memory: fix zapping migration entries for device-private THPs

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99727

mm/huge_memory: properly handle refcounted PUD mappings on fork

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99386

smb: client: don't resurrect an exiting tcon from cached dir workers

In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99416

ovl: read the nlink xattr of every indexed non-dir

In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.

CVSS 3.1 · 5.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99449

usb: gadget: fix refcount underflow in gadgetfs_bind() error path

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix refcount underflow in gadgetfs_bind() error path gadgetfs_bind() calls get_dev() only on the success path, but gadgetfs_unbind() called from the enomem error label unconditionally calls put_dev(). When bind fails (e.g. ENOMEM), put_dev() fires without a matching get_dev(), leaving the refcount unbalanced. A subsequent close of the ep0 file descriptor calls dev_release() -> put_dev() which hits zero and frees the object; then gadgetfs_kill_sb() calls put_dev(the_device) again on the already-freed pointer, triggering a refcount underflow and use-after-free. Fix by calling get_dev() at the start of gadgetfs_bind(), before any error path that invokes gadgetfs_unbind(), so the reference is always balanced regardless of whether bind succeeds or fails.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99539

ksmbd: fix session reference leak on compounded SESSION_SETUP

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix session reference leak on compounded SESSION_SETUP A compound request can place SESSION_SETUP after another command. That earlier command leaves a reference to its session in work->sess. smb2_sess_setup() then overwrites work->sess with the session it looks up or creates, and the dispatcher later puts work->sess only once. The inherited reference is never dropped. That leaks the session, together with its setup connection and socket, and every repeat of the compound leaks another. unreferenced object (size 512): __kmalloc_cache_noprof+0x32c/0x3a0 ksmbd_smb2_session_create+0xf6/0x9c0 [ksmbd] smb2_sess_setup+0xda4/0x6280 [ksmbd] handle_ksmbd_work+0x88c/0x1cb0 [ksmbd] Save the inherited session on entry. After the request has been processed, release it once, but only when smb2_sess_setup() has replaced work->sess with its own session or cleared it. Do this after ksmbd_conn_unlock() so the put does not run under srv_mutex. An error path may instead leave the inherited session in work->sess. Keep it there, so the dispatcher still puts it and the error response is still signed or encrypted with it as before.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99657

mm/mmu_notifier: set ->mm only after mmgrab()

In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99572

f2fs: fix to avoid potential reference count leak in do_garbage_collect()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential reference count leak in do_garbage_collect() In do_garbage_collect(), we have reserved reference counts on summary cache of all segments, once gc_thread encounter freezing, we need to release all reference counts.

CVSS 3.1 · 1.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99619

drm/amdgpu: don't drop the gang dependency fence twice

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the gang dependency fence twice drm_sched_job_add_dependency() drops the fence reference when it fails, but amdgpu_cs_submit() drops it again, so the scheduled fence of a gang member loses a reference it still needs. A GFX+COMPUTE gang waiting for another context, with the xarray node allocation for the leader's dependency failed through failslab: WARNING: drivers/dma-buf/dma-fence.c:589 at dma_fence_release+0x34d/0x730, CPU#1: amd_uapi_regres/2993 drm_sched_job_cleanup+0x2c2/0x340 [gpu_sched] amdgpu_job_free+0xcb/0x3e0 [amdgpu] amdgpu_cs_parser_fini+0x435/0x710 [amdgpu] amdgpu_cs_ioctl+0xcd2/0x7a60 [amdgpu] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:dma_fence_signal_timestamp_locked+0x1b8/0x610 (cherry picked from commit 5aa070a83c8378810b906cc8bfc650ce69822a7c)

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-89692

nfsd: clear CALLBACK_RUNNING on failed delegation recall queue

In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit at entry to serialize recall work, then calls nfsd4_run_cb() to queue the recall. When the queue attempt fails the refcount bump is undone, but the RUNNING bit is left set. The only site that clears the bit is nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the workqueue and is therefore unreachable when nothing was queued. The bit becomes a permanent latch on dp->dl_recall.cb_flags: every subsequent break_lease() on the same delegation hits the early-return guard in nfsd_break_one_deleg() and silently skips the recall, so the delegation is never broken and the conflicting open or lock stalls. Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside the refcount_dec.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64534

nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request().

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64467

rust_binder: use a u64 stride when cleaning up the offsets array

In the Linux kernel, the following vulnerability has been resolved: rust_binder: use a u64 stride when cleaning up the offsets array Allocation's Drop walks the offsets array (binder_size_t = u64 entries), cleaning up the objects, but it used usize instead of u64 for both the stride and the per-entry read. On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels it walks the 8-byte entries in 4-byte steps, iterating an N-entry array 2N times, and reads the always-zero high word as offset 0, cleaning up the object at offset 0 N extra times. As a result the referenced node or handle ends up with a lower reference count than it actually has (a refcount over-decrement), and binder's reference accounting is corrupted; for example, the owner can be notified of a strong reference release (BR_RELEASE) even though references still remain. Change the stride to u64, and read each entry as a u64, narrowing it to usize with try_into(). On 32-bit ARM, when this over-decrement would drive a count below zero, the driver's existing refcount guard refuses it and fires: rust_binder: Failure: refcount underflow!

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64473

vfio: Remove device debugfs before releasing devres

In the Linux kernel, the following vulnerability has been resolved: vfio: Remove device debugfs before releasing devres VFIO device debugfs files created with debugfs_create_devm_seqfile() store a devres allocated debugfs_devm_entry as inode private data. vfio_unregister_group_dev() currently calls vfio_device_del() before vfio_device_debugfs_exit(), but device_del() releases devres. This can leave debugfs entries visible with stale inode private data while unregister waits for userspace references to drain. Remove the per-device debugfs tree before vfio_device_del(). The debugfs view is diagnostic only, so losing it at the start of unregister is preferable to preserving entries whose backing storage may already have been released. Complete the teardown by clearing the per-device debugfs root after removal. This matches the global debugfs root cleanup and prevents future users from mistaking a removed dentry for a live debugfs tree during the remainder of unregister.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64466

rust_binder: clear freeze listener on node removal

In the Linux kernel, the following vulnerability has been resolved: rust_binder: clear freeze listener on node removal Generally userspace is supposed to explicitly clear freeze listeners before they drop the refcount on the node ref to zero, but there's nothing forcing that. Currently, in this scenario the freeze listener remains in the freeze_listeners rbtree and in the remote node's freeze listener list, even though the ref for which the listener is registered is gone. This could potentially lead to a memory leak due to a refcount cycle. Thus, remove the freeze listener in this scenario.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-50219

expat: libexpat: Use-after-free vulnerability due to improper handler call depth tracking

libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_GetBuffer, XML_Parse, XML_ParseBuffer, XML_ParserFree, or XML_ParserReset from within handlers in cases of a policy violation. Thus, a use-after-free can occur,

CVSS 3.1 · 4.9 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-125191

FFmpeg through 9.0.2 V4L2 M2M Decoder Deadlock via Reference Count Leak

FFmpeg through 9.0.2 contains a reference count leak in libavcodec/v4l2_buffers.c that allows attackers to deadlock the V4L2 mem2mem decoder on multi-plane capture formats. Attackers can supply crafted H.264, HEVC, or VP9 streams with resolution changes, making ff_v4l2_m2m_codec_reinit() wait forever and hang the decoding application.

CVSS 4.0 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74620

net/sched: act_gact, act_police: range check the fallback control action

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products