Search vulnerabilities

Results 199

Export CSV
CVE-2026-121481

Integer Overflow in EVP_EncodeBlock() with Very Large Input Lengths

Issue summary: Calling EVP_EncodeBlock() with an input length close to INT_MAX may overflow the calculation of the encoded output size and write past the end of the caller-supplied output buffer. Impact summary: No path by which an attacker can trigger this has been identified. An application that passes an input length near INT_MAX to EVP_EncodeBlock() could suffer a heap buffer overflow, crashing or corrupting its own memory, but it must itself supply such a length. CWE: CWE-190: Integer Overflow or Wraparound Description: EVP_EncodeBlock() base64-encodes a buffer of a caller-supplied length into an output buffer that the caller allocates. The caller is expected to reserve 4*((len+2)/3)+1 bytes. For input lengths close to INT_MAX, the arithmetic that computes the encoded length overflows a signed integer, so the function writes more data than the documented output size. The result is a heap buffer overflow in the calling process. Reaching this requires an application to pass an input length near INT_MAX to EVP_EncodeBlock(). OpenSSL's TLS, QUIC and CMS implementations never encode buffers of that size, and the command line tools cannot practically be made to do so: the limits on reading a proxy password from a file and on bignum sizes prevent it. An application that accepts an attacker-controlled length and forwards it to EVP_EncodeBlock() without its own bound check is exposed. The severity is Low because no attacker-controlled path to the overflow is known. The caller must already hold a buffer of about two gigabytes before the defect can be reached. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-121482

openssl: openssl: Denial of Service via crafted CMS or PKCS#7 SignedData message

Verifying a maliciously crafted CMS or PKCS#7 SignedData message with CRL checking enabled may consume excessive CPU time, growing with the square of the message size.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84786

Possible NULL Dereference in Non-SMTP DANE Clients

Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. Impact summary: The impact is limited to a client crash (potential Denial of Service). CWE: CWE-476: NULL Pointer Dereference Description: A DANE-enabled TLS client that supports TLSA records with at least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2) usage may crash by dereferencing a NULL pointer if the server claims a trusted CA's certificate to be its end-entity certificate and has an unusual mix of associated TLSA records. DANE SMTP clients should not be affected since only the DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable in SMTP. For example, the Postfix MTA is not affected, while the Exim MTA does not at present use OpenSSL's DANE implementation. Use of DANE in validation of RFC7250 raw public keys (RPKs) is also unaffected, as these only use DANE-EE(3) TLSA records. Only applications that support combining the DANE PKI with a traditional PKI are potentially affected. A DANE-enabled browser or similar, that uses OpenSSL's DANE API could be affected. FIPS impact: no The DANE API is outside the FIPS module boundary.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-95690

Excessive Memory Allocation in DTLS Handshake Message Reassembly

Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may cause OpenSSL to allocate a full message-length reassembly buffer for each buffered message, so a small amount of wire data consumes a large amount of memory. Impact summary: A remote attacker can send a few small crafted DTLS handshake fragments to make a DTLS server or client allocate well over a megabyte of memory per connection, which may lead to memory exhaustion and Denial of Service if many connections are made. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: DTLS handshake messages can arrive out of order and fragmented, so OpenSSL buffers fragments of up to ten out-of-sequence messages until reassembly is possible. When the first fragment of a new message arrives, OpenSSL allocates a buffer sized to the full message length declared in the fragment header, plus a reassembly bitmap, instead of storing only the bytes actually received. The declared length is capped by the maximum certificate list size, 128KB by default, and that cap applies to every handshake message type rather than only to Certificate messages. Only DTLS endpoints reach this code. TLS, QUIC and applications that do not use DTLS are unaffected. An attacker sends fragments that declare a large message length but carry almost no data, using up to ten distinct message sequence numbers. A single connection can then hold roughly 1.4MB of buffers from about 156 bytes on the wire. Because the number of buffered messages is capped, memory exhaustion requires many connections or many peers, which is why the severity is Low. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124709

Unbounded Memory Retention in QUIC Server for Rejected Streams

Issue summary: A QUIC server that rejects a stream opened by the peer may retain that stream's state for the lifetime of the connection if the peer resets the stream before the rejection is signalled, even though the peer's stream credit is returned. Impact summary: A remote client that completes a QUIC handshake can repeatedly open and reset streams, causing server memory to grow without bound until the process runs out of memory and every connection on it is lost. This is a Denial of Service. CWE: CWE-401: Missing Release of Memory after Effective Lifetime Description: QUIC servers track each stream the peer opens. When the incoming stream policy rejects a stream, OpenSSL schedules a STOP_SENDING frame, marks the stream deleted and returns the peer's stream credit. A deleted stream is collected only once its receive part is fully drained, which for a rejected stream means the STOP_SENDING has been acknowledged. If the peer sends RESET_STREAM first, the reset cancels the pending STOP_SENDING, so it is never sent or acknowledged and the stream is never collected. The default configuration reaches this path. Once a connection has a default stream, meaning the application has read from or written to the connection as the tutorial server does, the effective incoming stream policy rejects streams the application does not accept. Applications that set the REJECT policy explicitly are affected too. Each retained stream costs about 300 bytes, and the peer's stream credit window paces how quickly they accumulate. A client that keeps the connection open and keeps opening and resetting streams grows server memory without bound. The severity is Low because growth is slow, needs a long-lived connection, and causes no memory corruption or disclosure. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-35190

Out-of-Bounds Read in TLS 1.3 Key-Share Processing with Suite B Certificate Flag

Issue summary: A server configured with the Suite B certificate flag through SSL_CTX_set_cert_flags() and with TLS 1.3 enabled may read past the end of a fixed group list when it processes a ClientHello whose supported_groups and key_share contain no Suite B group. Impact summary: A remote client can send a ClientHello that makes the server read past the end of a static array. The values read are never returned to the client, so no memory is disclosed; on builds with sanitizers or hardened allocators the read may crash the process, causing Denial of Service. CWE: CWE-125: Out-of-bounds Read Description: When the Suite B certificate flag is set, OpenSSL restricts the accepted groups to P-256 and P-384 by substituting a fixed two-element list for the configured group list. The tuple machinery used for key-share selection was not updated for this substitution: tls1_get_group_tuples() still returns the configured tuples, which by default describe eight groups. The server-side walk in tls_parse_ctos_key_share() then advances through the two-element list using those tuple counts without checking the cumulative offset against the number of groups present. Only applications that call SSL_CTX_set_cert_flags() with SSL_CERT_FLAG_SUITEB_128_LOS and leave TLS 1.3 enabled are affected. The openssl s_server -suiteB_128 option sets an X.509 verification parameter instead, so the stock command line server is not vulnerable. Default configurations do not reach this code. A client that offers only groups outside the Suite B set, such as X25519, forces every tuple to be walked and the read to run past the array. The bytes read are compared against client group IDs and never sent back, so no memory is disclosed. On builds with address sanitizers or hardened allocators the read can abort the process; in ordinary release builds it reads a few bytes of adjacent constant data. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-107493

Use-After-Free in PEM_X509_INFO_read_bio_ex() when appending to a caller-supplied stack fails

Issue summary: When an application passes a stack to PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails, OpenSSL frees every entry in the stack, both the old ones and any new ones, but leaves them in the stack. Impact summary: An application that passes an existing stack to PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may use memory that was already freed. This can cause a crash or, in principle, memory corruption. Malformed PEM data can make the read fail, but only applications that pass an existing stack are affected, and OpenSSL itself does not do this. CWE: CWE-416: Use After Free Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and private keys from PEM data and adds them to a stack of X509_INFO structures. If the application passes a stack that is not NULL, the function adds the new entries to it and must leave the entries that are already there unchanged. If reading fails, the function frees every entry in the stack. This includes the entries that were there before the call, and the entries added by the call. It does not remove these entries from the stack, so the stack keeps pointers to freed memory. The failure can happen at any point, even before any entry was added. A PEM item with invalid content is enough. This also happens if the stack was empty: entries added before the failure are freed but stay in the stack. An application that then reads or frees the stack will use memory that was already freed. This can crash the application or, in principle, corrupt memory. Only applications that pass a stack that is not NULL are affected. OpenSSL itself never does this. Its own callers, including the code that TLS uses to load CA certificates, always pass NULL. When the stack is NULL, the function frees only the entries that it created itself, which is safe. We expect that very few applications pass an existing stack. An attacker can make the read fail with malformed PEM data, but cannot make an application pass an existing stack. The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read() and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and 1.0.2 have only the first two of these functions. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-5535

SSL_select_next_proto buffer overread

Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.

CVSS 3.1 · 9.1 Critical EPSS 6.1% KEV · Not listed
Vendors
Debian Netapp Openssl and 2 more
Products
CVE-2023-6237

Excessive time spent checking invalid RSA public keys

Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

CVSS 3.1 · 5.9 Medium EPSS 2.5% KEV · Not listed
Vendors
Netapp Openssl Redhat and 1 more
Products
500f 500f Firmware 8300 and 56 more
CVE-2026-84782

DTLS Retransmits Handshake Messages From a Stale Buffer Offset

Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (returning WANT_WRITE) if the underlying transport temporarily cannot accept more data. While such a write is suspended, the DTLS retransmission timer may independently fire and ask the retransmission logic to resend an earlier, already-acknowledged-as-sent message from its retransmit queue. The retransmission logic reused the same internal buffer and position tracking as the message that was still being written, without resetting the position back to the start of the message being retransmitted. As a result the retransmission was read starting from wherever the suspended write had left off, producing a mislabelled message whose body was leftover bytes from the other, larger message still in flight - content that was never meant to be sent at that point, and which could run past the end of the allocated buffer. Separately, even when the retransmission is positioned correctly, allowing it to run to completion while another write is suspended overwrites the same shared bookkeeping that the suspended write depends on to resume. When the application later resumes the suspended write (via a subsequent SSL_read(), SSL_write(), SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a state inconsistent with the message and aborts the process in a debugging build. The fix resets the retransmission's read position to the start of the message before resending, and skips retransmission entirely whenever a handshake write is still suspended, deferring to the next call that resumes it instead. FIPS impact: no The affected code is outside the FIPS module boundary.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-4741

Use After Free with SSL_free_buffers

Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

CVSS 3.1 · 9.8 Critical EPSS 3.3% KEV · Not listed
Vendors
Debian Netapp Openssl and 1 more
Products
CVE-2024-4603

Excessive time spent checking DSA keys and parameters

Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.

CVSS 3.1 · 5.3 Medium EPSS 1.2% KEV · Not listed
Products
500f 500f Firmware 8300 and 37 more
CVE-2024-12797

RFC7250 handshakes with unauthenticated servers don't abort as expected

Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a server may fail to notice that the server was not authenticated, because handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode is set. Impact summary: TLS and DTLS connections using raw public keys may be vulnerable to man-in-middle attacks when server authentication failure is not detected by clients. RPKs are disabled by default in both TLS clients and TLS servers. The issue only arises when TLS clients explicitly enable RPK use by the server, and the server, likewise, enables sending of an RPK instead of an X.509 certificate chain. The affected clients are those that then rely on the handshake to fail when the server's RPK fails to match one of the expected public keys, by setting the verification mode to SSL_VERIFY_PEER. Clients that enable server-side raw public keys can still find out that raw public key verification failed by calling SSL_get_verify_result(), and those that do, and take appropriate action, are not affected. This issue was introduced in the initial implementation of RPK support in OpenSSL 3.2. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

CVSS 3.1 · 7.4 High EPSS 1.8% KEV · Not listed
CVE-2024-2511

Unbounded memory growth with session handling in TLSv1.3

Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions Impact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.

CVSS 3.1 · 5.9 Medium EPSS 59.3% KEV · Not listed
Vendors
Debian Netapp Openssl and 2 more
Products
CVE-2024-2467

Perl-crypt-openssl-rsa: side-channel attack in pkcs#1 v1.5 padding mode (marvin attack)

A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2006-4339

Openssl: openssl: signature forgery via improper pkcs-1 padding removal leading to certificate validation bypass

A flaw was found in OpenSSL. When configured to use an RSA key with exponent 3, OpenSSL improperly removes PKCS-1 padding before generating a hash. This allows remote attackers to forge PKCS #1 v1.5 signatures. Consequently, OpenSSL may incorrectly verify X.509 and other certificates, leading to a bypass of trust and authentication mechanisms.

CVSS 3.1 · 9.1 Critical EPSS 3.9% KEV · Not listed
Vendors
CVE-2022-2068

The c_rehash script allows command injection

In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze).

CVSS 3.1 · 9.8 Critical EPSS 96.4% KEV · Not listed
Vendors
Products
Sannav Debian Linux Fedora and 46 more
CVE-2022-1292

The c_rehash script allows command injection

The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).

CVSS 3.1 · 9.8 Critical EPSS 82.6% KEV · Not listed
Vendors
Products
Debian Linux Fedora A250 and 55 more
CVE-2019-1543

ChaCha20-Poly1305 with long nonces

ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).

CVSS 3.0 · 7.4 High EPSS 5.7% KEV · Not listed
Vendors
CVE-2018-0737

Cache timing vulnerability in RSA Key Generation

The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o).

CVSS 3.0 · 5.9 Medium EPSS 11.6% KEV · Not listed
Products