Search vulnerabilities

Results 17,147

Export CSV
CVE-2026-133074

Moodle: idor in quiz overrides web service

A flaw was found in Moodle. Insufficient authorization checks in the quiz overrides web service allow an authenticated user with teacher privileges to modify user and group overrides for quizzes they do not have permission to manage. An attacker could exploit this vulnerability to improperly alter exam access, deadlines, or testing conditions across unauthorized courses.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99346

KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch When the pCPU where the VMCB was most recently used is switched, reset the ASID generation in both VMCBs, triggering new ASID allocation for the immediate VMRUN as well as the next VMRUN on the other VMCB. The ASID is shared between vmcb01 and vmcb02, and gets flushed on every nested transition. However, since pCPU tracking is done per VMCB, it is possible for one VMCB to allocate a new ASID when migrated to a new pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can result in the same ASID being used by multiple vCPUs on the old pCPU. Example scenario: - vCPU runs on pCPU A, vmcb01 is active, asid=1. - vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2. - Another vCPU runs on pCPU A and allocates asid=2 as well. - vCPU migrates back to pCPU A, and then switches to vmcb02 before it runs again with vmcb01. - No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2. - Two vCPUs end up using asid=2 on the same pCPU. Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its pCPU does not change. Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested enablement as hardening, so that a new ASID allocation is always triggered when nested is disabled and re-enabled. No performance regression was noticed when overcommitting L1 vCPUs in L0 (to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a tight loop bouncing between 2 vCPUs in L2. An alternative (and perhaps more proper) fix would be tracking the ASID per-VMCB instead (e.g. [1]). However, that's a more involved change, and it would result in having different ASIDs for L1 and L2 without actually properly maintaining them. It would probably work because all TLB flushes target the current VMCB, and the other VMCB is always flushed on nested transitions, but the code ends up in an arguably more fragile state. Punt a proper clean fix to an incoming (and overdue) overhaul of SVM's ASID usage [2]. [1] https://lore.kernel.org/lkml/20250205182402.2147495-2-yosry.ahmed@linux.dev [2] https://lore.kernel.org/kvm/20260728003557.1136583-1-yosry@kernel.org

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99372

NFSD: cap the number of listeners accepted in listener_set

In the Linux kernel, the following vulnerability has been resolved: NFSD: cap the number of listeners accepted in listener_set nfsd_nl_listener_set_doit() matches each requested listener against the existing set. The nested loop that does this is O(N * M), where N is the requested count and M is the existing count. The loop runs under sv_lock with bottom halves disabled. A userland request with a very large listener list can therefore spin in atomic context for a long time. Reject a request that carries more than NFSD_NL_LISTENER_MAX (1024) entries. The check goes in nfsd_nl_validate_listeners(), before the code takes any lock. The limit is far above any realistic configuration. This patch does not cap M. Only the message size bounded N; real sockets bound M. A listener_set result set is the requested set, so that path also holds M at the cap, but __write_ports_addxprt() adds two listeners per call and removes none, so repeated calls can push M past it. The worst case under sv_lock is therefore 1024 * M, plus 1024 nla_parse_nested() calls. Both interfaces require CAP_NET_ADMIN.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99751

bpf: Fix skb_pull() BUG in __bpf_redirect_neigh()

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99758

sctp: account for chunk padding in sctp_init_cause()

In the Linux kernel, the following vulnerability has been resolved: sctp: account for chunk padding in sctp_init_cause() sctp_init_cause() accepts a chunk when skb_tailroom() can hold the cause header and the payload. sctp_addto_chunk() then writes 0-3 bytes of padding before that header so the chunk stays 4-byte aligned. The check does not include the padding, and the following skb_put() calls skb_over_panic() from softirq. Count the padding sctp_addto_chunk() is about to write. The cause length on the wire stays the header plus the payload. Found by LLM inspection, triggered and tested the fix.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-132241

In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126714

Partially overwritten session files can lead to remote code execution

Partially overwritten session files can lead to remote code execution. The files session save handler, which is the default, writes updated session data into the existing session file without first clearing it. If a write is interrupted, the file can contain the beginning of the new session followed by the end of the old one, and bytes of an ordinary string can later be unserialized as objects. An attacker who can influence the session data, for example through session upload progress, and interrupt a write at a suitable point may inject objects, which can lead to code execution when the application contains a suitable gadget chain. Session data can also be corrupted. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 9.2 Critical EPSS 13.1% KEV · Not listed
Vendors
Products
CVE-2026-99744

net: atl1c: drop oversized RX frames instead of panicking

In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129289

PHP-FPM request smuggling through an unread HTTP request body

PHP-FPM request smuggling through an unread HTTP request body. PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 9.2 Critical EPSS 16.1% KEV · Not listed
Vendors
Products
CVE-2026-99538

ksmbd: ignore network devices of other namespaces

In the Linux kernel, the following vulnerability has been resolved: ksmbd: ignore network devices of other namespaces With no interface list configured, ksmbd binds every interface that comes up. ksmbd_netdev_event() does not look at the device's namespace, and create_socket() opens the listener in the namespace of the task raising NETDEV_UP. A container with its own address on a bridge brings up its interface and finds port 445 in its namespace already taken by ksmbd, so an SMB server running inside the container fails with "Address already in use". Interfaces are also matched by name only, so a container's eth0 going down would stop the listener on the host's eth0. Only handle netdev events for devices in init_net.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99559

ARM: 9524/1: mm: align hugetlb mappings to the huge page size

In the Linux kernel, the following vulnerability has been resolved: ARM: 9524/1: mm: align hugetlb mappings to the huge page size mmap(MAP_HUGETLB) on 32-bit Arm can return an address which is not aligned to the huge page size. In a QEMU virt guest, unmapping the VMA then hits the alignment check in __unmap_hugepage_range(): kernel BUG at mm/hugetlb.c:5213! Internal error: Oops - BUG: 0 [#1] SMP ARM PC is at __unmap_hugepage_range+0x540/0x584 LR is at __zap_vma_range+0x13a0/0x1410 Commit 7bd3f1e1a9ae ("mm: make hugetlb mappings go through mm_get_unmapped_area_vmflags") made hugetlb mappings use the architecture's arch_get_unmapped_area(). The generic implementations handle hugetlb alignment, but the Arm implementations only account for the optional SHMLBA cache-colouring constraint. A 4 KiB-page kernel can therefore align the mapping to 4 KiB or 16 KiB instead of the required 2 MiB. Set the alignment mask from the file's hstate for hugetlb mappings in both Arm implementations. Huge-page alignment also satisfies the SHMLBA constraint.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99562

ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle

In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99695

ocfs2: find the xattr entry again after converting a block to a bucket

In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130669

ImageMagick before 7.1.2-35 Null Pointer Dereference via -subimage Option

ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service.

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131293

Improper Access Control in the Data Management Automation API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, an authenticated user with permission to edit and run playbooks could read or overwrite persisted data for playbook runs outside the authorized label, or ownership scope for that user. The affected data can include playbook inputs, prompt and block results, outputs, and secrets that playbooks save in run data. Overwriting the data could corrupt results that paused, scheduled, or parent playbook runs later use. The vulnerability is possible because the playbook automation APIs do not bind data operations to the active playbook run.

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92809

PrestaShop psgdpr before 1.4.4 GDPR Log Forgery

PrestaShop psgdpr versions before 1.4.4 fail to validate that GDPR consent log entries are attributed to the authenticated customer. Authenticated attackers can submit arbitrary customer identifiers to create forged consent records for other customers, corrupting audit logs.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76216

Vikunja before 2.5.0 Principal-Type Confusion via LinkSharing

Vikunja before 2.5.0 contains a principal-type confusion vulnerability where LinkSharing principals with id N are treated as user principals with users.id == N at three permission checks lacking type guards. Attackers with a link-share JWT can remove victims from teams, enumerate and delete victim bot users, or read team rosters by exploiting id collisions in the autoincrement space.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74783

Scriban 6.6.0 before 7.2.1 Parser Recursion Denial of Service

Scriban versions 6.6.0 before 7.2.1 contain a non-enforcing ExpressionDepthLimit guard that fails to stop recursive descent parsing of deeply nested expressions. Attackers can supply templates with deeply nested parentheses, array initializers, object initializers, or unary operators to trigger an uncatchable StackOverflowException that immediately terminates the host process.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-73611

File Browser 2.50.0 before 2.63.22 JWT Expiration Bypass

File Browser versions 2.50.0 before 2.63.22 fail to validate JWT expiration when proxy authentication is configured with a non-default logout page. Attackers with a previously valid token can access protected routes and administrative endpoints indefinitely, and exchange expired tokens for fresh ones via the renewal endpoint.

CVSS 4.0 · 7.6 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-22186

Bio-Formats < 8.5.0 XXE in Leica XLEF Metadata Parser

Bio-Formats versions before 8.5.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsing.

CVSS 4.0 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products