A race condition was addressed with improved handling of symbolic links. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to modify protected parts of the file system.
Search vulnerabilities
jenkins: Jenkins: Unauthorized administrator account creation via setup wizard race condition
In Jenkins 2.587 and earlier, LTS 2.580.1 and earlier, the HTTP endpoint for creating the first user account does not check whether the setup wizard has been completed, resulting in a race condition that allows unauthenticated attackers to create an administrator account while the initial user account is being replaced.
jenkins: Jenkins: Arbitrary file write via race condition in artifact extraction
Jenkins 2.587 and earlier, LTS 2.580.1 and earlier checks for symbolic links in the path of an extracted file only before creating its parent directories, not immediately before writing it, and allows symbolic links in artifacts to replace existing files or empty directories, allowing attackers with Item/Configure permission to write files to arbitrary locations on the Jenkins controller file system.
Flatpak: flatpak: toctou race condition allows symlink redirection
A flaw was found in Flatpak. A Time-of-check to time-of-use (TOCTOU) race condition exists in the `org.freedesktop.Flatpak.SystemHelper` component. This vulnerability occurs because a privileged `chmod` operation executes before the OSTree repository validation within the `Deploy()` function. An attacker can exploit this timing window to redirect symlinks to arbitrary files, potentially leading to unauthorized file manipulation or information disclosure.
bcache: fix cached_dev.sb_bio use-after-free and crash
In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.
i2c: designware: amdisp: Fix resume-probe race condition issue
In the Linux kernel, the following vulnerability has been resolved: i2c: designware: amdisp: Fix resume-probe race condition issue Identified resume-probe race condition in kernel v7.0 with the commit 38fa29b01a6a ("i2c: designware: Combine the init functions"),but this issue existed from the beginning though not detected. The amdisp i2c device requires ISP to be in power-on state for probe to succeed. To meet this requirement, this device is added to genpd to control ISP power using runtime PM. The pm_runtime_get_sync() called before i2c_dw_probe() triggers PM resume, which powers on ISP and also invokes the amdisp i2c runtime resume before the probe completes resulting in this race condition and a NULL dereferencing issue in v7.0 Fix this race condition by using the genpd APIs directly during probe: - Call dev_pm_genpd_resume() to Power ON ISP before probe - Call dev_pm_genpd_suspend() to Power OFF ISP after probe - Set the device to suspended state with pm_runtime_set_suspended() - Enable runtime PM only after the device is fully initialized
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix static_branch_dec() underflow for aql_disable. syzbot reported static_branch_dec() underflow in aql_enable_write(). [0] The problem is that aql_enable_write() does not serialise concurrent write()s to the debugfs. aql_enable_write() checks static_key_false(&aql_disable.key) and later calls static_branch_inc() or static_branch_dec(), but the state may change between the two calls. aql_disable does not need to track inc/dec. Let's use static_branch_enable() and static_branch_disable(). [0]: val == 0 WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288 Modules linked in: CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full) Tainted: [U]=USER, [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311 Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00 RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4 RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98 FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline] __static_key_slow_dec kernel/jump_label.c:321 [inline] static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336 aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343 short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383 vfs_write+0x2aa/0x1070 fs/read_write.c:684 ksys_pwrite64 fs/read_write.c:793 [inline] __do_sys_pwrite64 fs/read_write.c:801 [inline] __se_sys_pwrite64 fs/read_write.c:798 [inline] __x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f530cf9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012 RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010 RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978 </TASK>
smb: client: make use of smbdirect_socket.recv_io.credits.available
In the Linux kernel, the following vulnerability has been resolved: smb: client: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.
nvme-pci: ensure we're polling a polled queue
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---
drm/amdgpu: prevent immediate PASID reuse case
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d)
mm/pagewalk: fix race between concurrent split and refault
In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock().
net: shaper: protect from late creation of hierarchy
In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case.
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock" This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1. Under rare circumstances, multiple udev threads can collect i801 device info on boot and walk i801_acpi_io_handler somewhat concurrently. The first will note the area is reserved by acpi to prevent further touches. This ultimately causes the area to be deregistered. The second will enter i801_acpi_io_handler after the area is unregistered but before a check can be made that the area is unregistered. i2c_lock_bus relies on the now unregistered area containing lock_ops to lock the bus. The end result is a kernel panic on boot with the following backtrace; [ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102) [ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 14.971880] #PF: supervisor read access in kernel mode [ 14.971884] #PF: error_code(0x0000) - not-present page [ 14.971887] PGD 0 P4D 0 [ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI [ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1 [ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023 [ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b [ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282 [ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568 [ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000 [ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028 [ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580 [ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000 [ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000 [ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0 [ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 14.971972] Call Trace: [ 14.971977] <TASK> [ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df [ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df [ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972014] ? __die_body.cold+0x8/0xd [ 14.972021] ? page_fault_oops+0x132/0x170 [ 14.972028] ? exc_page_fault+0x61/0x150 [ 14.972036] ? asm_exc_page_fault+0x22/0x30 [ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801] [ 14.972085] acpi_ex_access_region+0x5b/0xd0 [ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0 [ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230 [ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310 [ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110 [ 14.972121] acpi_ds_exec_end_op+0x321/0x510 [ 14.972127] acpi_ps_parse_loop+0xf7/0x680 [ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0 [ 14.972143] acpi_ps_execute_method+0x137/0x270 [ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0 [ 14.972158] acpi_evaluate_object+0x134/0x2f0 [ 14.972164] acpi_evaluate_integer+0x50/0xe0 [ 14.972173] ? vsnprintf+0x24b/0x570 [ 14.972181] acpi_ac_get_state.part.0+0x23/0x70 [ 14.972189] get_ac_property+0x4e/0x60 [ 14.972195] power_supply_show_property+0x90/0x1f0 [ 14.972205] add_prop_uevent+0x29/0x90 [ 14.972213] power_supply_uevent+0x109/0x1d0 [ 14.972222] dev_uevent+0x10e/0x2f0 [ 14.972228] uevent_show+0x8e/0x100 [ 14.972236] dev_attr_show+0x19 ---truncated---
media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt()
In the Linux kernel, the following vulnerability has been resolved: media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt() In the interrupt handler rain_interrupt(), the buffer full check on rain->buf_len is performed before acquiring rain->buf_lock. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as rain->buf_len is concurrently accessed and modified in the work handler rain_irq_work_handler() under the same lock. Multiple interrupt invocations can race, with each reading buf_len before it becomes full and then proceeding. This can lead to both interrupts attempting to write to the buffer, incrementing buf_len beyond its capacity (DATA_SIZE) and causing a buffer overflow. Fix this bug by moving the spin_lock() to before the buffer full check. This ensures that the check and the subsequent buffer modification are performed atomically, preventing the race condition. An corresponding spin_unlock() is added to the overflow path to correctly release the lock. This possible bug was found by an experimental static analysis tool developed by our team.
Cocos AI Intra-handshake attested TLS implementation is vulnerable to TOCTOU Attacks
Cocos AI is a confidential computing system for AI. Prior to 0.9.0, Cocos AI performs attestation only once when an attested TLS connection is established. An attacker who can modify the attester's workload code, memory-backed state, configuration, or attached devices after that check can keep the existing connection open while the peer continues trusting stale initial Evidence. This gap is especially significant for long-lived connections because the verifier has no mechanism to detect the changed state. This issue is fixed in version 0.9.0.
vsock: Fix transport_{g2h,h2g} TOCTOU
In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_{g2h,h2g} TOCTOU vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload. transport_{g2h,h2g} may become NULL after the NULL check. Introduce vsock_transport_local_cid() to protect from a potential null-ptr-deref. KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_find_cid+0x47/0x90 Call Trace: __vsock_bind+0x4b2/0x720 vsock_bind+0x90/0xe0 __sys_bind+0x14d/0x1e0 __x64_sys_bind+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0 Call Trace: __x64_sys_ioctl+0x12d/0x190 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
net: Fix TOCTOU issue in sk_is_readable()
In the Linux kernel, the following vulnerability has been resolved: net: Fix TOCTOU issue in sk_is_readable() sk->sk_prot->sock_is_readable is a valid function pointer when sk resides in a sockmap. After the last sk_psock_put() (which usually happens when socket is removed from sockmap), sk->sk_prot gets restored and sk->sk_prot->sock_is_readable becomes NULL. This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded after the initial check. Which in turn may lead to a null pointer dereference. Ensure the function pointer does not turn NULL after the check.
Local privilege escalation via execve(2) TOCTOU race
During execve(2) of a SUID binary, the new virtual address space is installed before the process credentials are updated. During this window, a process running as the same user can access the target process's memory via procfs or linprocfs, because the kernel's debugging permission check still saw the original credentials. An unprivileged local user can exploit this race to modify the address space of a SUID binary before its credentials are elevated, potentially gaining full control of the affected system.
Policycoreutils: policycoreutils: toctou race condition in fixfiles allows arbitrary selinux label manipulation
A TOCTOU (Time-of-Check-Time-of-Use) race condition vulnerability was found in the fixfiles script in policycoreutils. When running fixfiles relabel or fixfiles restore, the script used find and chcon commands to locate and relabel unlabeled files under /tmp and other directories. A local attacker could exploit a race window between the file discovery and the label change operation by swapping directory components with symlinks, causing chcon to follow the symlink and modify SELinux labels on arbitrary system files. This could undermine SELinux mandatory access control protections on critical files such as /etc/shadow.