Search vulnerabilities

Results 9,193

Export CSV
CVE-2026-129231

NLTK: Quadratic-time DoS in SeekableUnicodeStreamReader.readline on an unterminated corpus line via per-iteration full-buffer rescan

NLTK (Natural Language Toolkit) is a suite of open source Python modules, data sets, and tutorials supporting research and development in Natural Language Processing. Prior to 3.10.4, SeekableUnicodeStreamReader.readline appends each new block to a growing character buffer and reruns splitlines over the entire buffer on every iteration. An attacker-controlled corpus file containing one very long unterminated line therefore causes quadratic CPU consumption in line-oriented corpus readers and can deny service. This issue is fixed in version 3.10.4.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76541

SPL Injection through Data Model Calculations in Splunk Enterprise

In Splunk Enterprise versions below 10.6.0, 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could store attacker-controlled Search Processing Language (SPL) in a shared data model calculation. When a user who can run a search against the shared data model runs one, the injected SPL can run using the permissions of the user who ran the search. This could expose sensitive credentials to the user who created the shared data model. The vulnerability is possible because Splunk Enterprise does not safely neutralize data model calculation fields before it includes them in generated searches. For more information see About data models (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.4/build-a-data-model/about-data-models) in the Splunk documentation. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.

CVSS 3.1 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76544

SPL Injection through Metric Alert Filters in Splunk Enterprise

In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could cause scheduled metric alert searches to run arbitrary Search Processing Language (SPL) commands and access credentials stored in cleartext. This requires at least one non-internal metric index on the instance. The vulnerability is possible because Splunk Enterprise does not fully validate metric alert filter input before using it in a scheduled search.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99689

xfs: fix temporary cursor leak in btree shift corruption paths

In the Linux kernel, the following vulnerability has been resolved: xfs: fix temporary cursor leak in btree shift corruption paths In xfs_btree_lshift and xfs_btree_rshift, when XFS_IS_CORRUPT detects an invalid firstrec/lastrec result after xfs_btree_dup_cursor has successfully allocated a temporary cursor, the error path jumps to error0 which returns without freeing tcur. This leaks the cursor memory, the xfs_group reference, and the per-level buffer references held by the duplicated cursor. Jump to error1 instead, which calls xfs_btree_del_cursor(tcur, XFS_BTREE_ERROR) to properly release all resources.

CVSS 3.1 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131223

Search Processing Language (SPL) Injection through the Lookup Editor in Splunk Enterprise Security

In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user could trick an authenticated user into opening a link that the unauthenticated user creates. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the authenticated user. The commands could access data and perform actions available to that user. The vulnerability is possible because the Lookup Editor does not validate lookup identifiers from URL parameters before adding them to searches. The vulnerability requires the attacker to phish the user by tricking them into opening a link that the attacker creates. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Create and manage lookups in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.0/managing-security-content/create-and-manage-lookups-in-splunk-enterprise-security) in the Splunk documentation.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99635

vhost/vsock: size receive SKBs from declared payload

In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts.

CVSS 3.1 · 6.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131281

Insecure Default Audit Logging for Asset Approval and Effective User Changes through the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, a user with asset edit permission could change the approval requirements and effective automation user for an asset without Splunk SOAR recording field-level audit details for those changes. This could weaken investigation and accountability for changes to security-sensitive asset settings. The vulnerability is possible because Splunk SOAR does not include the asset approval voting fields and effective automation user field in its field-level audit coverage.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99594

arm64: kexec_file: Fix elf_headers memory leak in retry loop

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec_file: Fix elf_headers memory leak in retry loop A retry allocates new elf headers and overwrites image->elf_headers, leaking the previous buffer. Free it before assigning. [catalin.marinas@arm.com: drop the redundant NULL check before vfree()]

CVSS 3.1 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-61827

netty-incubator-codec-ohttp: BinaryHttpParser should enforce limits for variable lengths fields

netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, BinaryHttpParser does not enforce limits on encoded variable-length fields controlled by a remote peer. A remote peer can cause the decoder to buffer data indefinitely until memory is exhausted, causing denial of service. This issue is fixed in version 0.0.23.Final.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-69133

netty-incubator-codec-ohttp: OHTTP codecs retain consumed outer cumulation buffers after completed exchanges

netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. From 0.0.20.Final until 0.0.27.Final, OHttpClientCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpClientCodec.java and OHttpServerCodec in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpServerCodec.java retain the consumed outer cumulationBuffer after a valid OHTTP exchange completes, even though OHttpRequestResponseContext.destroy in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java releases the inner Binary HTTP cumulation and the channel remains active. A peer can complete a large request or response and leave the keep-alive connection idle, causing the client and server handlers to retain the current high-water pooled or direct buffer capacity until later inbound content replaces it or the handler is removed. Many long-lived idle connections can pin substantial memory and create availability pressure. The issue does not cause unbounded growth for repeated exchanges on a single channel. This issue is fixed in version 0.0.27.Final.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99666

mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp()

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ]

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99569

f2fs: release a removed xattr node in roll-forward recovery

In the Linux kernel, the following vulnerability has been resolved: f2fs: release a removed xattr node in roll-forward recovery When xattrs shrink enough to fit in the inline xattr area, write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If the file is then fsynced without a checkpoint, only the inode block is written, with i_xattr_nid of 0. Roll-forward recovery starts from the checkpointed inode, whose i_xattr_nid still points to the old xattr node. f2fs_recover_inline_xattr() copies only the inline xattr area, and f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps the stale xattr node: - The node block is never released, and fsck reports "nonzero bytes in xattr space after end of list". - If the inline xattr list ends exactly at the end of the inline area, its terminator is read from the stale node, and the removed xattrs come back after recovery. When the fsynced inode has no xattr node but the checkpointed one has, release the old xattr node as truncate_node() does: check its block address, invalidate the block and drop its node cache, which may still be dirty.

CVSS 3.1 · 3.6 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99576

f2fs: zone: fix to avoid bio split on sequential zone

In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99577

wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue Frames routed to the high queue are transmitted right after DTIM beacons only, inside the ATIM window, while they wait in the shared TX page pool. The driver puts no limit on how many it hands over, so as long as one station dozes, any sustained broadcast or multicast traffic outruns the drain and empties the pool: measured on an RTL8822BU AP with a single client in power save and ~40 frames/s of mDNS chatter, the free page count at 0x240 goes from 1803 to 16 in about 100 seconds and stays there for as long as the traffic lasts. From that point every other transmit queues behind the backlog, authentication responses arrive too late for anyone to join, and the reserved page download fails ("error beacon valid"). The AP keeps beaconing and only a reboot recovers. Feed the high queue through a small budget that refills below the measured drain rate (about 3 frames per DTIM, ~15/s at dtim_period 2 on the default 2 TU ATIM window); whatever exceeds the budget leaves on its access category queue right away. The high queue backlog is now bounded by the burst size under any load, so the page pool cannot run dry, at the price that a dozing station may miss part of a broadcast storm.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99578

wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99646

mm/vma: don't leak the charge for stack growth

In the Linux kernel, the following vulnerability has been resolved: mm/vma: don't leak the charge for stack growth acct_stack_growth() charges stack expansion even without VM_ACCOUNT. This can happen for read-only or MAP_NORESERVE mappings created with MAP_GROWSDOWN. Unmapping these VMAs does not release the charge, leaking Committed_AS. Only check and charge growth for VM_ACCOUNT VMAs, matching mremap(). Unaccounted growth skips the overcommit check while remaining subject to the other stack-growth limits.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99649

mm/ksm: check large swap-cache folios before mapping them

In the Linux kernel, the following vulnerability has been resolved: mm/ksm: check large swap-cache folios before mapping them KSM folios are always small, but their shared swap slots can be read back as part of a large folio in the swap cache. ksm_might_need_to_copy() skips large folios, so another process can map a page with an incompatible anon_vma or page index. Reverse mapping then cannot find the new mapping, preventing migration or reclaim. Apply the same compatibility checks to large folios as to small ones. Pass the page corresponding to the swap entry and copy only that page when necessary. In do_swap_page()'s copy path, decrement only that slot's swap count, because the source swap-cache folio can now be large. Fix generated by an LLM and sent by Chris Mason in private.

CVSS 3.1 · 2.5 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99622

drm/amdgpu: drop the dma-buf reference when a KFD import fails

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: drop the dma-buf reference when a KFD import fails import_obj_create() takes a reference on the dma-buf for the new kgd_mem, but the error path after validating the BO doesn't drop it. Since the validation reserves the BO interruptibly, an import failing with -ERESTARTSYS leaks the exported BO with its memory, and keeps the module in use. Importing a 64 MiB VRAM BO in a loop while getting SIGUSR1 every 20 us and another thread changes the BO's mappings: INFO: 171821 imports, VRAM used before 65 MiB, after 129 MiB modprobe: FATAL: Module amdgpu is in use. Drop the reference, and free the sync object and the mutex of the kgd_mem as well. With that VRAM usage returns to 65 MiB after the same test. (cherry picked from commit b4d1eca2729840148ff2ea957724ce764ca5a94e)

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-8468

Unbounded buffer accumulation in multipart header parsing causes denial of service in plug

Allocation of Resources Without Limits or Throttling vulnerability in plug_project plug allows denial of service via unbounded buffer accumulation in multipart header parsing. Plug.Conn.read_part_headers/2 in lib/plug/conn.ex does not obey its :length parameter. There is no upper bound on the size of the accumulated buffer. By contrast, the sibling function read_part_body has an explicit byte_size(acc) > length guard that stops accumulation once a limit is reached. No such guard exists in read_part_headers. An unauthenticated remote attacker can exhaust server memory by sending a crafted multipart/form-data request, causing a denial of service. This issue affects plug: from 1.4.0-rc.0 before 1.15.4, from 1.16.0 before 1.16.3, from 1.17.0 before 1.17.1, from 1.18.0 before 1.18.2, and from 1.19.0 before 1.19.2.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Products
CVE-2026-133622

Certmonger: missing size limits and timeouts in scep ca reply handling lead to denial of service

A flaw was found in certmonger. This vulnerability allows a malicious certificate authority or an attacker positioned on an unencrypted network to cause a Denial of Service (DoS) by sending oversized or deliberately slow responses. Certmonger fails to enforce size limits or transfer timeouts when downloading and buffering Simple Certificate Enrollment Protocol (SCEP) replies over HTTP. Consequently, an attacker can exhaust host memory, drive CPU usage to capacity, or cause certificate requests to hang indefinitely.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors