Search vulnerabilities

Results 568

Export CSV
CVE-2025-55653

GPAC MP4Box Denial of Service via Division by Zero in Fraction Parsing

GPAC MP4Box v2.4 was discovered to contain a floating point exception in the gf_parse_lfrac function (utils/error.c). Processing a crafted MP4 file containing a zero-denominator fraction string causes gf_parse_lfrac() to divide by zero, terminating the process with SIGFPE.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-110605

libschrift through 0.10.2 Divide by Zero via unitsPerEm in draw_line

libschrift through 0.10.2 contains a divide by zero vulnerability that allows attackers to crash applications by supplying a font with unitsPerEm of 0 in the head table. Attackers can provide a crafted TrueType font whose NaN glyph coordinates bypass clip_points(), causing an out-of-bounds raster read in draw_line() during sft_render() and crashing the process.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98919

drm/xe: harden adjust_idledly() against divide-by-zero and overflow

In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98647

bpf: Fix divide-by-zero in btf_struct_walk()

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: <TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems;

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112054

Schroedinger libschroedinger through 1.0.11 Divide by Zero in Low-Delay Transform Parsing

Schroedinger libschroedinger through 1.0.11 contains a divide by zero vulnerability that allows attackers to crash applications by supplying a zero slice_bytes_denom or slice count in a Dirac stream. Attackers can provide a crafted low-delay picture parsed by schro_decoder_parse_transform_parameters and schro_decoder_parse_lowdelay_transform_data to trigger a SIGFPE and cause denial of service.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-74449

drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68297

tipc: fix u16 MTU truncation in media and bearer MTU validation

In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071) produce small incorrect MTU values, resulting in link malfunction behaviors. Crash stack (triggered as unprivileged user via user namespace): tipc_link_set_queue_limits net/tipc/link.c:2531 tipc_link_create net/tipc/link.c:520 tipc_node_check_dest net/tipc/node.c:1279 tipc_disc_rcv net/tipc/discover.c:252 tipc_rcv net/tipc/node.c:2129 tipc_udp_recv net/tipc/udp_media.c:392 Two independent paths lack the upper bound check: 1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET) 2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET) Fix both by rejecting MTU values above U16_MAX.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68106

drm/amdgpu: fix division by zero with invalid uvd dimensions

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112013

libtta through 2.3 Divide by Zero via tta_decoder_init_get_info

libtta through 2.3 contains a divide-by-zero vulnerability in tta_decoder_init_get_info() that allows attackers to crash applications by supplying an unvalidated zero sample rate. Attackers can craft a .tta file with a recomputed header CRC32 that triggers SIGFPE, crashing applications including the bundled tta console tool.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109246

FreeRDP before 3.32.0 Shadow Server Divide-by-Zero via Frame Acknowledge PDU

FreeRDP before 3.32.0 contains a divide-by-zero vulnerability in the freerdp-shadow-cli shadow server: the frame id in a client's Frame Acknowledge PDU is stored without a range check, so the in-flight frame count in shadow_encoder_inflight_frames() can underflow. An authenticated client can acknowledge a frame id one greater than the last frame sent, causing shadow_encoder_create_frame_id() to divide by zero (SIGFPE) and terminate the process, disconnecting all viewers.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98390

x86/amd_node: Avoid divide by zero on virtualized systems

In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-57932

gve: guard XDP xmit NDO on existence of xdp queues

In the Linux kernel, the following vulnerability has been resolved: gve: guard XDP xmit NDO on existence of xdp queues In GVE, dedicated XDP queues only exist when an XDP program is installed and the interface is up. As such, the NDO XDP XMIT callback should return early if either of these conditions are false. In the case of no loaded XDP program, priv->num_xdp_queues=0 which can cause a divide-by-zero error, and in the case of interface down, num_xdp_queues remains untouched to persist XDP queue count for the next interface up, but the TX pointer itself would be NULL. The XDP xmit callback also needs to synchronize with a device transitioning from open to close. This synchronization will happen via the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call, which waits for any RCU critical sections at call-time to complete.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-53122

mptcp: cope racing subflow creation in mptcp_rcv_space_adjust

In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf().

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2018-11212

libjpeg-turbo: Divide By Zero in alloc_sarray function in jmemmgr.c

An issue was discovered in libjpeg 9a and 9d. The alloc_sarray function in jmemmgr.c allows remote attackers to cause a denial of service (divide-by-zero error) via a crafted file.

CVSS 3.0 · 6.5 Medium EPSS 4.6% KEV · Not listed
Vendors
Canonical Debian Ijg and 4 more
Products
CVE-2025-21725

smb: client: fix oops due to unset link speed

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix oops due to unset link speed It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always be set by the server, so the client must handle any values and then prevent oopses like below from happening: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48 89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8 e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89 c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24 RSP: 0018:ffffc90001817be0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99 RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228 RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200 R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58 FS: 00007fe27119e740(0000) GS:ffff888148600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0x159/0x1b0 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? do_error_trap+0x90/0x130 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? exc_divide_error+0x39/0x50 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? asm_exc_divide_error+0x1a/0x20 ? cifs_debug_data_proc_show+0xa39/0x1460 [cifs] ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? seq_read_iter+0x42e/0x790 seq_read_iter+0x19a/0x790 proc_reg_read_iter+0xbe/0x110 ? __pfx_proc_reg_read_iter+0x10/0x10 vfs_read+0x469/0x570 ? do_user_addr_fault+0x398/0x760 ? __pfx_vfs_read+0x10/0x10 ? find_held_lock+0x8a/0xa0 ? __pfx_lock_release+0x10/0x10 ksys_read+0xd3/0x170 ? __pfx_ksys_read+0x10/0x10 ? __rcu_read_unlock+0x50/0x270 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe271288911 Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911 RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003 RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000 </TASK> Fix this by setting cifs_server_iface::speed to a sane value (1Gbps) by default when link speed is unset.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-26777

fbdev: sis: Error out if pixclock equals zero

In the Linux kernel, the following vulnerability has been resolved: fbdev: sis: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2023-31085

kernel: divide-by-zero error in ctrl_cdev_ioctl when do_div happens and erasesize is 0

An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd->erasesize), used indirectly by ctrl_cdev_ioctl, when mtd->erasesize is 0.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2019-16168

sqlite: Division by zero in whereLoopAddBtreeIndex in sqlite3.c

In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a "severe division by zero in the query planner."

CVSS 3.1 · 6.5 Medium EPSS 4.2% KEV · Not listed
Vendors
Products
CVE-2026-105402

ImageMagick: ImageMagick: Denial of Service via crafted XMP profile

This CVE ID has been rejected as a duplicate.

CVSS 3.1 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-107159

MiniUPnPd through 2.3.11 Divide-by-Zero DoS via SSDP M-SEARCH MX Header

MiniUPnPd through 2.3.11 built with --strict contains a divide-by-zero vulnerability in ProcessSSDPData() that allows unauthenticated local network attackers to crash the daemon. Attackers can send a single multicast M-SEARCH datagram with MX: 0 and a known ST to port 1900, triggering SIGFPE and denying UPnP IGD service.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Products