Search vulnerabilities

Results 378

Export CSV
CVE-2026-16313

Sg3_utils: sg3_utils: arbitrary command execution via udev property injection in sg_inq --export

A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.

CVSS 3.1 · 7.6 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-1502

HTTP client proxy tunnel headers not validated for CR/LF

CR/LF bytes were not rejected by HTTP client proxy tunnel headers or host.

CVSS 4.0 · 5.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-106715

NewsBreak: NewsBreak: Information disclosure via improper WebView origin check

NewsBreak for Android version 26.21.0 treats data:text/html; URLs as trusted in its WebView JavaScript bridge origin check. An attacker can supply such a page through the newsbreak://openweb deep link and invoke NBJS.callNative with the getLoginInfo action, disclosing a signed-in user's account information and session token after the user opens the crafted link.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-102471

CRLF header injection in vertx-mail-client allows manipulation of outgoing SMTP messages

In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) characters in user-supplied email header names and values before writing them into the SMTP DATA section. A CR/LF sequence embedded in a name or value passed to MailMessage.addHeader(), MailMessage.setHeaders(), MailAttachment.addHeader(), or MailAttachment.setHeaders() is written verbatim to the wire, allowing an attacker to inject arbitrary headers (e.g. Bcc, Reply-To, Content-Type) or prepend body content to the outgoing message. The same weakness affects MIME part metadata set via MailAttachment.setContentType(), setDisposition(), setDescription(), and setContentId(), which are written directly into MIME part headers without validation. A secondary weakness in Utils.mustEncode(char) additionally allows a bare LF in a From display-name to bypass Q-encoding and reach the wire unchanged. An unauthenticated attacker who can control any header name, header value, or attachment metadata field passed to the mail client (for example via a web form or API that feeds into MailMessage) can exploit this to redirect email copies, spoof headers, or tamper with message structure. The impacted component is io.vertx:vertx-mail-client.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-120639

CGI versions before 5.00 for Perl allow HTTP header injection via entity decoding after the newline check in header and unchecked values in multipart_start and do_push

CGI versions before 5.00 for Perl allow HTTP header injection via entity decoding after the newline check in header and unchecked values in multipart_start and do_push. With autoEscape off, header decodes HTML entities in extra header values after its newline check, so an encoded CR or LF reaches the response. multipart_start does not check header values for newlines, and do_push does not check the type it prints in each part. An application that passes request data into these header values can be made to add headers or split the response.

CVSS 3.1 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-13575

HTTP::Session versions before 0.54 for Perl allow memcached command injection via unfiltered session ids in HTTP::Session::Store::CHI

HTTP::Session versions before 0.54 for Perl allow memcached command injection via unfiltered session ids in HTTP::Session::Store::CHI. The session id from the client's cookie reaches the CHI cache unchanged. The sibling HTTP::Session::Store::Memcached rejects ids that contain control characters, but the CHI store has no such check, and CHI does not escape keys for its memcached drivers. With a memcached driver, a CR and LF in the session id end the cache command early, and the server reads the bytes after them as further commands.

CVSS 3.1 · 5.6 Medium EPSS 1.1% KEV · Not listed
Vendors
Products
CVE-2026-123095

mpv 0.29.0 before 0.42.0 Playlist Entry Injection via ytdl_hook Newlines

mpv 0.29.0 before 0.42.0 contains a playlist injection vulnerability in the bundled ytdl_hook script that allows remote attackers to add unchecked entries by embedding newlines in playlist URLs. Attackers controlling a feed or page can bypass url_is_safe() to open file:// or av:// inputs, reading local files or loading shared objects via ladspa for code execution.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Mpv
Products
Mpv
CVE-2026-123298

SMTP Command Injection via Email Verification in JetBrains Hub

In JetBrains Hub before 2026.2.52556 sMTP command injection via email verification was possible

CVSS 3.1 · 5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Hub
CVE-2026-57154

OPNsense: Configuration line injection via multiple GUI text fields

OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.11 and 26.4.1p1, authenticated Web UI or API users with delegated access to affected settings can submit CR or LF characters in fields expected to contain one line, causing generated privileged service configuration files to contain additional attacker-controlled directives or policy lines. The confirmed Dnsmasq path includes dhcp_boot.filename, dhcp_boot.servername, dhcp_boot.address, and dhcp_options.value, which are rendered into /usr/local/etc/dnsmasq.conf; access through page-services-dnsforwarder covers api/dnsmasq/*. Related affected fields span OpenVPN, DHCPv6, Unbound, IPsec, NTP, PPP or MPD, Monit, firewall, sudo, WebGUI, and System General configuration. Applying or restarting the affected service can alter behavior beyond the delegated setting, create service-side files, cross RBAC boundaries, or cause denial of service. Line injection through Monit mail password and adjacent Monit text fields into /usr/local/etc/monitrc demonstrated root command execution. Arbitrary shell command execution was not confirmed for the Dnsmasq path. This issue is fixed in versions 26.1.11 and 26.4.1p1.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-61477

Libvirt: libvirt: newline injection in network xml dns txt/srv fields allows dnsmasq config directive injection

An injection vulnerability was found in libvirt's virtual network driver. The network XML parser does not strip newline characters from DNS TXT record value attributes and SRV record domain/target attributes. These values are written verbatim into the dnsmasq configuration file generated by the network driver, allowing a user with permission to define virtual networks to inject arbitrary dnsmasq configuration directives such as dhcp-script, leading to arbitrary command execution as root.

CVSS 3.1 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2026-3633

Libsoup: libsoup: header and http request injection via crlf injection

A flaw was found in libsoup. A remote attacker, by controlling the method parameter of the `soup_message_new()` function, could inject arbitrary headers and additional request data. This vulnerability, known as CRLF (Carriage Return Line Feed) injection, occurs because the method value is not properly escaped during request line construction, potentially leading to HTTP request injection.

CVSS 3.1 · 3.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-3234

Mod_proxy_cluster: mod_proxy_cluster: response body corruption via crlf injection

A flaw was found in mod_proxy_cluster. This vulnerability, a Carriage Return Line Feed (CRLF) injection in the decodeenc() function, allows a remote attacker to bypass input validation. By injecting CRLF sequences into the cluster configuration, an attacker can corrupt the response body of INFO endpoint responses. Exploitation requires network access to the MCMP protocol port, but no authentication is needed.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-52977

futex: Prevent lockup in requeue-PI during signal/ timeout wakeup

In the Linux kernel, the following vulnerability has been resolved: futex: Prevent lockup in requeue-PI during signal/ timeout wakeup During wait-requeue-pi (task A) and requeue-PI (task B) the following race can happen: Task A Task B futex_wait_requeue_pi() futex_setup_timer() futex_do_wait() futex_requeue() CLASS(hb, hb1)(&key1); CLASS(hb, hb2)(&key2); *timeout* futex_requeue_pi_wakeup_sync() requeue_state = Q_REQUEUE_PI_IGNORE *blocks on hb->lock* futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_IGNORE => -EAGAIN double_unlock_hb(hb1, hb2) *retry* Task B acquires both hb locks and attempts to acquire the PI-lock of the top most waiter (task B). Task A is leaving early due to a signal/ timeout and started removing itself from the queue. It updates its requeue_state but can not remove it from the list because this requires the hb lock which is owned by task B. Usually task A is able to swoop the lock after task B unlocked it. However if task B is of higher priority then task A may not be able to wake up in time and acquire the lock before task B gets it again. Especially on a UP system where A is never scheduled. As a result task A blocks on the lock and task B busy loops, trying to make progress but live locks the system instead. Tragic. This can be fixed by removing the top most waiter from the list in this case. This allows task B to grab the next top waiter (if any) in the next iteration and make progress. Remove the top most waiter if futex_requeue_pi_prepare() fails. Let the waiter conditionally remove itself from the list in handle_early_requeue_pi_wakeup().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119424

OPNsense before 26.7.8 Wireless WPA Configuration Line Injection via Identity

OPNsense core before 26.7.8 contains a configuration line injection vulnerability that allows authenticated users with wireless-edit privilege to inject directives by embedding CR/LF characters in WPA fields. Attackers can place newlines in wpa.identity, wpa.passphrase, or RADIUS shared secrets to append arbitrary wpa_supplicant or hostapd directives loaded by root-run daemons.

CVSS 4.0 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-3634

Libsoup: libsoup: http header injection and response splitting via crlf injection in content-type header

A flaw was found in libsoup. An attacker controlling the value used to set the Content-Type header can inject a Carriage Return Line Feed (CRLF) sequence due to improper input sanitization in the `soup_message_headers_set_content_type()` function. This vulnerability allows for the injection of arbitrary header-value pairs, potentially leading to HTTP header injection and response splitting attacks.

CVSS 3.1 · 3.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-28296

Gvfs: ftp gvfs backend: arbitrary ftp command injection via crlf sequences in file paths

A flaw was found in the FTP GVfs backend. A remote attacker could exploit this input validation vulnerability by supplying specially crafted file paths containing carriage return and line feed (CRLF) sequences. These unsanitized sequences allow the attacker to terminate intended FTP commands and inject arbitrary FTP commands, potentially leading to arbitrary code execution or other severe impacts.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-1536

Libsoup: libsoup: http header injection or response splitting via crlf injection in content-disposition header

A flaw was found in libsoup. An attacker who can control the input for the Content-Disposition header can inject CRLF (Carriage Return Line Feed) sequences into the header value. These sequences are then interpreted verbatim when the HTTP request or response is constructed, allowing arbitrary HTTP headers to be injected. This vulnerability can lead to HTTP header injection or HTTP response splitting without requiring authentication or user interaction.

CVSS 3.1 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-1467

Libsoup: libsoup: http header injection via specially crafted urls when an http proxy is configured

A flaw was found in libsoup, an HTTP client library. This vulnerability, known as CRLF (Carriage Return Line Feed) Injection, occurs when an HTTP proxy is configured and the library improperly handles URL-decoded input used to create the Host header. A remote attacker can exploit this by providing a specially crafted URL containing CRLF sequences, allowing them to inject additional HTTP headers or complete HTTP request bodies. This can lead to unintended or unauthorized HTTP requests being forwarded by the proxy, potentially impacting downstream services.

CVSS 3.1 · 5.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-121946

zbateson mail-mime-parser before 3.0.9 and 4.x before 4.0.6 CRLF Header Injection via Message Builders

zbateson mail-mime-parser before 3.0.9 and 4.x before 4.0.6 contains a CRLF header injection vulnerability in message-building helpers that fail to strip CR and LF characters. Attackers supplying crafted MIME type, charset, encoding, micalg, or protocol values can inject extra header lines such as a forged Bcc into outgoing messages.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118179

Request forgery via news: links

Clicking a news: or snews: link that referenced a message-ID made Thunderbird connect, without asking, to the host and port given in the link, even if it was not a configured news server. Line breaks in the message-ID were sent to the server unmodified, so a crafted link could send arbitrary commands to services reachable from the user's network. In addition, snews: links to such servers connected without TLS. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products