Search vulnerabilities

Results 5,758

Export CSV
CVE-2026-99668

mm/huge_memory: fix zapping migration entries for device-private THPs

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix zapping migration entries for device-private THPs A PMD migration entry can refer to a device-private folio. zap_huge_pmd_folio() checks the folio type instead of the entry type, so it treats such a migration entry as a device-private entry. Installing the migration entry already removed the reverse mapping and dropped the mapping reference. Zapping it must not repeat those operations. Concurrent MADV_DONTNEED during migration back to system memory can trigger this. Check the PMD entry type using pmd_is_device_private_entry(). Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99727

mm/huge_memory: properly handle refcounted PUD mappings on fork

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: properly handle refcounted PUD mappings on fork copy_huge_pud() copies device-DAX entries without taking a folio reference or updating mapcounts and the child's RSS. For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA, forcing copy_page_range() to traverse the whole VMA on fork. Any remaining huge PUDs are then copied without accounting for the new mappings. Unmapping them in the child decrements accounting that was never added. Use vm_normal_page_pud() to identify refcounted mappings. Take a folio reference and add the child's PUD rmap and RSS accounting before installing the copied entry. Pass src and dst VMAs consistently instead of src and dst MM. Move the TODO.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99386

smb: client: don't resurrect an exiting tcon from cached dir workers

In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99416

ovl: read the nlink xattr of every indexed non-dir

In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.

CVSS 3.1 · 5.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99449

usb: gadget: fix refcount underflow in gadgetfs_bind() error path

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix refcount underflow in gadgetfs_bind() error path gadgetfs_bind() calls get_dev() only on the success path, but gadgetfs_unbind() called from the enomem error label unconditionally calls put_dev(). When bind fails (e.g. ENOMEM), put_dev() fires without a matching get_dev(), leaving the refcount unbalanced. A subsequent close of the ep0 file descriptor calls dev_release() -> put_dev() which hits zero and frees the object; then gadgetfs_kill_sb() calls put_dev(the_device) again on the already-freed pointer, triggering a refcount underflow and use-after-free. Fix by calling get_dev() at the start of gadgetfs_bind(), before any error path that invokes gadgetfs_unbind(), so the reference is always balanced regardless of whether bind succeeds or fails.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99539

ksmbd: fix session reference leak on compounded SESSION_SETUP

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix session reference leak on compounded SESSION_SETUP A compound request can place SESSION_SETUP after another command. That earlier command leaves a reference to its session in work->sess. smb2_sess_setup() then overwrites work->sess with the session it looks up or creates, and the dispatcher later puts work->sess only once. The inherited reference is never dropped. That leaks the session, together with its setup connection and socket, and every repeat of the compound leaks another. unreferenced object (size 512): __kmalloc_cache_noprof+0x32c/0x3a0 ksmbd_smb2_session_create+0xf6/0x9c0 [ksmbd] smb2_sess_setup+0xda4/0x6280 [ksmbd] handle_ksmbd_work+0x88c/0x1cb0 [ksmbd] Save the inherited session on entry. After the request has been processed, release it once, but only when smb2_sess_setup() has replaced work->sess with its own session or cleared it. Do this after ksmbd_conn_unlock() so the put does not run under srv_mutex. An error path may instead leave the inherited session in work->sess. Keep it there, so the dispatcher still puts it and the error response is still signed or encrypted with it as before.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129421

Joomla Extension - joomlatools.com - Server-side request forgery in URL uploads in DOCman extension < 6.2.2

Joomla Extension - joomlatools.com - Server-side request forgery in URL uploads in DOCman extension < 6.2.2 - The URL proxy and URL upload features were available to users below manager level and fetched arbitrary addresses, allowing server-side requests to internal or private network resources.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-133240

OpnForm before 2.8.2 SSRF Guard Bypass via PublicWebhookUrl::isPublicIp

OpnForm before 2.8.2 contains a server-side request forgery vulnerability in PublicWebhookUrl::isPublicIp that fails to reject CGNAT, NAT64 and 6to4 address ranges. Authenticated users can configure webhook, form import or PDF image URLs resolving to these ranges to make the server send HTTPS requests to internal hosts.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77377

Bolt: Server-Side Request Forgery (SSRF) in URL-upload and embed endpoints

Bolt is a fully open source, adaptable platform for building and running modern websites. Prior to 6.1.4, the authenticated URL-upload endpoint and authenticated embed endpoint fetch user-supplied URLs server-side without protection against internal targets, allowing an attacker with the applicable backend permission to cause the Bolt server to request those targets. This issue is fixed in version 6.1.4.

CVSS 3.1 · 5.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131284

Improper Control of Artifact Workflow State through the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, an authenticated user with permission to view and edit containers could import a container archive that makes artifacts appear to be part of a case or have notes when no corresponding case associations or notes exist. This could cause Representational State Transfer (REST) API clients and filters to use incorrect artifact state. The vulnerability is possible because container archive import accepts artifact workflow state from the archive instead of deriving that state from associated cases and notes. For more information see Splunk SOAR REST API reference (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference) in the Splunk documentation.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131250

Improper Access Control in the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, a user with permission to edit containers for an allowed label could forge the author attribution of container pins and access limited user details outside the expected authorization boundary. The Container Pin Representational State Transfer (REST) API does not prevent caller-provided author fields from reaching generic model binding, which lets the request reassign a pin author or query user-related data outside the expected authorization scope. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.3.1/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131257

Improper Access Control through the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, a user with permission to view and edit containers and at least one container label could set misleading user and app provenance on containers that the user creates and learn whether user IDs and installed app identifiers exist. The vulnerability is possible because the Representational State Transfer (REST) API accepts client-supplied values for server-managed container fields.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130235

Improper Request URL Validation in the Okta .NET SDK Abstractions Library

In the Okta .NET SDK Abstractions library, outbound HTTP requests are not restricted to the configured Okta organization domain when processing certain URL formats. If a URL parameter is modified to specify an external host, the library may transmit the configured SSWS API token to that unintended destination.

CVSS 3.1 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-131275

Improper Input Validation of Timestamps through the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, a user with container edit permission could supply timestamps when creating containers and artifacts through the Representational State Transfer (REST) API. This could alter the timeline shown to analysts and cause configured data retention strategies to delete affected records earlier than intended. The vulnerability is possible because the REST API accepts client-supplied values for timestamps that Splunk SOAR uses to order records and apply data retention. The early deletion impact requires an applicable data retention strategy; the timeline impact does not. For more information see Manage your PostgreSQL database with data retention strategies (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-system-health-and-performance/manage-your-postgresql-database-with-data-retention-strategies) in the Splunk documentation.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99657

mm/mmu_notifier: set ->mm only after mmgrab()

In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: set ->mm only after mmgrab() Radeon uses a non-NULL notifier->mm to decide whether to call mmu_interval_notifier_remove() when freeing a buffer object. __mmu_interval_notifier_insert() sets ->mm before validating the range, so a wrapping userptr range can leave ->mm set after insertion fails. Cleanup then tries to remove an unregistered notifier for which no mm reference was acquired. Set ->mm only after mmgrab(), once insertion can no longer fail. While we could fix radeon's code instead, setting ->mm on success only makes the code more robust. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77315

Flyto2 Core: http.paginate follows server-supplied next-page URLs (Link header / cursor) without SSRF revalidation

Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, http.paginate in src/core/modules/atomic/http/paginate.py validates only the initial base_url, and _paginate_link_header then follows a server-supplied Link: rel="next" URL without calling the SSRF guard again. A low-privileged caller can make an allowed first page point the next request at an internal or metadata service, causing a readable second-order SSRF whose response body is aggregated into all_items and returned. This issue is fixed in version 2.26.8.

CVSS 3.1 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77313

Flyto2 Core: SSRF guard validates the resolved IP but connects by hostname, allowing DNS-rebinding TOCTOU

Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, validate_url_ssrf in src/core/utils.py resolves and checks a hostname but returns the hostname URL rather than the validated address, and session.get in http.get performs an independent DNS lookup when connecting. A low-privileged caller with control of the hostname's DNS can make the first lookup return a public address and the connection-time lookup return an internal address, bypassing the SSRF guard for all modules that call it and exposing readable internal or metadata-service responses. Successful exploitation requires attacker-controlled DNS and a successful timing-dependent answer change between the two lookups. This issue is fixed in version 2.26.8.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77316

Flyto2 Core: SSRF guard bypass via DNS rebinding (validate_url_ssrf resolves-then-connects without pinning)

Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.8, validate_url_ssrf() in src/core/utils.py validates one DNS answer and then returns the hostname, while guarded_aiohttp_request(), enforce_outbound_url(), and validate_url_with_env_config() allow the outbound connection to perform an independent second lookup. A caller with control of the hostname's DNS can make validation see a public address and make the connection see an internal address, bypassing the guard across its outbound consumers and exposing readable internal or metadata-service responses. The attack requires low or zero DNS TTL behavior and a successful timing-dependent answer change; static multiple-address answers are checked and do not provide the same bypass. This issue is fixed in version 2.26.8.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133487

nodejs undici BalancedPool balanced-pool.js Object.assign prototype pollution

A security flaw has been discovered in nodejs undici up to 7.24.0. This affects the function Object.assign of the file balanced-pool.js of the component BalancedPool. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 7.24.1 is able to mitigate this issue. The patch is identified as 0d7ec33ff37563d3e7c98d11d7bca736f330d156. You should upgrade the affected component.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99572

f2fs: fix to avoid potential reference count leak in do_garbage_collect()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential reference count leak in do_garbage_collect() In do_garbage_collect(), we have reserved reference counts on summary cache of all segments, once gc_thread encounter freezing, we need to release all reference counts.

CVSS 3.1 · 1.9 Low EPSS < 1% KEV · Not listed
Vendors
Products