Search vulnerabilities

Results 9,182

Export CSV
CVE-2026-56375

ImageMagick - Memory Leak in ASHLAR Coder Action Failure

ImageMagick before 7.1.2-18 contains a memory leak vulnerability in the ASHLAR coder when an action fails. Attackers can trigger failed actions to exhaust memory resources and cause denial of service.

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-34267

Flowise Authenticated Command Execution and Sandbox Bypass via Puppeteer & Playwright Packages

Flowise v3.0.1 < 3.0.8, and 3.0.8 < 3.1.3 with 'ALLOW_BUILTIN_DEP' enabled contain an authenticated remote code execution vulnerability and node VM sandbox escape due to insecure use of integrated modules (Puppeteer and Playwright) within the nodevm execution environment. An authenticated attacker able to create or run a tool that leverages Puppeteer/Playwright can specify attacker-controlled browser binary paths and parameters. When the tool executes, the attacker-controlled executable/parameters are run on the host and circumvent the intended nodevm sandbox restrictions, resulting in execution of arbitrary code in the context of the host. This vulnerability was incorrectly assigned as a duplicate CVE-2025-26319 by the developers and should be considered distinct from that identifier.

CVSS 4.0 · 8.4 High EPSS 6.9% KEV · Not listed
Vendors
Products
CVE-2026-99741

tmpfs: keep the quota soft limits of an unused id

In the Linux kernel, the following vulnerability has been resolved: tmpfs: keep the quota soft limits of an unused id When the last reference to a dquot goes away, shmem_release_dquot() stores its limits in the rb tree of the mount, unless shmem_is_empty_dquot() says that there is nothing worth storing. That function looks at the usage and at the two hard limits only. So if the administrator sets nothing but soft limits for an id that owns no file yet, the entry is thrown away as soon as the dquot that Q_SETQUOTA used is released, and the id never gets to see a limit. To fix it, compare the soft limits as well: an entry can be empty only if both soft limits are zero as well, which is exactly what shmem_acquire_dquot() sets for a new entry. Fix generated by an LLM and sent by Josef Bacik in private. [ david: slightly adjusted description ]

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99742

mm/mempolicy: charge shared policy nodes

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: charge shared policy nodes Any local user can bypass memory.max with mbind() on a tmpfs file, and allocate unbounded kernel memory. mbind() sets a NUMA memory policy for a range of a mapping. If the mapping is of a shmem and friends, the kernel also stores the policy on the inode, in a tree with one entry per range of the file. Each mbind() on a single page of a mapping can add one shared policy node (struct sp_node) and one struct mempolicy to that tree. They outlive the mapping and stay around until the inode is destroyed. The tree is not bounded by the file size, so the file can be empty. Memory that user space can allocate must be charged to a memory cgroup. A slab cache does that for all of its objects if it is created with SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both structs without SLAB_ACCOUNT, so they are not charged to any cgroup. Reproduced with mbind() on single pages of an empty tmpfs file, from a cgroup with memory.max=8M: the global OOM killer killed tasks owned by root, and the machine panicked. Fix this by creating both caches with SLAB_ACCOUNT. This change implies that mbind() can now fail when running into memcg limits. Further, the policy_cache also serves task and VMA policies, so they are similarly accounted now. Note that per-file limits are not really helpful, as the user could simply use many files; having limits per user is tricky as well. Fix generated by an LLM and submitted by Chris Mason in private. [ david: smaller description tweaks ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99768

wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg()

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg() The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag is done in mac80211, so the only place it is set is in ieee80211_tx_dequeue(). This means that any frames that are sent to the driver via drv_tx() will no longer have the flag set. In particular, this affects packets going through ieee80211_tx_pending(). Evan reported that this can result in the ath9k driver failing to account such packets in its block ack window, eventually overrunning the window and stalling TX. Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside a valid block ack window. This should be harmless for the TXQ path, and will reinstate the previous behaviour for drivers that use the flag as a signal to track the packet in the window.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99337

KVM: TDX: Enable Bus Lock VM exit

In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99338

KVM: TDX: Enable Notify VM exit

In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99348

afs: Fix afs to abort the rxrpc call on send error

In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs to abort the rxrpc call on send error Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to abort the rxrpc call rather than just aborting on -ENOMEM and otherwise abandoning it. If the call is already complete due to network failure or a received abort, this will do nothing. Also make afs_make_call() always abort on send error; again, it does nothing if the rxrpc call is already dead.

CVSS 3.1 · 2.5 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99365

nfsd: Fix id-to-name cache entry leak in idtoname_parse()

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix id-to-name cache entry leak in idtoname_parse() idtoname_lookup() returns the id-to-name cache entry with a new reference. The name is parsed between the lookup and the update call, and when the parsed name is malformed (negative length or longer than IDMAP_NAMESZ), idtoname_parse() jumps to the error label without dropping the reference returned by idtoname_lookup(), leaking the cache entry. Release the reference with cache_put() before taking the error exit.

CVSS 3.1 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99376

NFSv4/pnfs: Free the netid when draining a data-server address list

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Free the netid when draining a data-server address list nfs4_pnfs_ds_addr_free() releases all three of an address entry's allocations, but the four sites that drain a decoded list before it reaches a data server open-code the loop and free only da_remotestr and the entry, leaking da_netid. Both layout drivers drain that list when nfs4_pnfs_ds_add() returned a data server already in the cache, and again on their error exits. Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has one owner. A striping mount reaches the cached case on nearly every GETDEVICEINFO, since many deviceIDs name the same data servers.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133609

erupts erupt UPMS CAPTCHA Endpoint EruptUserController.java EruptUserController.createCode memory allocation

A vulnerability was found in erupts erupt up to 2.0.2. This impacts the function EruptUserController.createCode of the file erupt-upms/src/main/java/xyz/erupt/upms/controller/EruptUserController.java of the component UPMS CAPTCHA Endpoint. Performing a manipulation of the argument height results in uncontrolled memory allocation. The attack may be initiated remotely. Upgrading to version 2.0.3 will fix this issue. The patch is named fc59a6eece991ff5aced363243d0b2d14f73ed95. It is recommended to upgrade the affected component.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99377

NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining().

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99383

smb: client: reclaim credits for decrypted reads with no matching mid

In the Linux kernel, the following vulnerability has been resolved: smb: client: reclaim credits for decrypted reads with no matching mid When a decrypted SMB2 READ response carries a MessageId that matches no outstanding request, both the inline receive_encrypted_read() and the offloaded smb2_decrypt_offload() paths drop the frame without accounting the credits the server granted in it. The plaintext unknown-frame path in cifs_demultiplex_thread() already reclaims them with smb2_add_credits_from_hdr(), so encrypted reads leak credits that the plaintext path would not. This also happens for legitimate frames - e.g. a reply that arrives after the client has timed out and dropped the mid - so over a long-lived connection the client's credit count drifts down and can eventually starve it of the ability to issue requests. The frame is AEAD-authenticated, so the granted credits in the decrypted header come from the real server and are safe to apply. Reclaim the credits from the decrypted header before dropping the frame, and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99712

KVM: x86: Conditionally resched when restarting REP string emulation

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Conditionally resched when restarting REP string emulation When restarting emulation, e.g. of a REP-prefixed string instruction, conditionally reschedule as emulating guest writes can be deceptively slow and expensive, e.g. when shadow paging is in use and each write can trigger write tracking. In a perfect world, restarting emulation (or not) would be less arbitrary, e.g. would honor not only host events (NEED_RESCHED, signals, etc.) but also guest events (e.g. by checking kvm_vcpu_has_events()). Unfortunately, as pointed out by Sashiko, pio_in_emulated()'s read-ahead logic is baked into the restart logic, as KVM relies on restarting emulation to drain the cache and avoid duplicate reads from the I/O port. I.e. re-entering the guest on kvm_vcpu_has_events() or __xfer_to_guest_mode_work_pending() would introduce architecturally-incorrect, guest-visible changes.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99500

s390/pci: Fix resource leak in zpci MSI setup

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix resource leak in zpci MSI setup If airq_iv_create() fails in __alloc_airq(), the zpci_sbv bit allocated by airq_iv_alloc_bit() is never freed. This permanently leaks one of the ZPCI_NR_DEVICES summary bits, reducing system capacity with each failed device hotplug. In systems with repeated device insertion failures or under memory pressure, all summary bits can be exhausted, preventing new PCI devices from being added until reboot. Add proper error handling to free the zpci_sbv bit and reset zdev->aisb if the AIBV creation fails.

CVSS 3.1 · 1.9 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-127960

Denial of service through folded HTTP response headers

Denial of service through folded HTTP response headers. The HTTP stream wrapper joins each continuation line of a folded response header to the accumulated value by allocating a new string and copying the whole value, so a response with many short continuation lines takes disproportionate CPU time to parse. An attacker who controls an HTTP or HTTPS response fetched through file_get_contents(), fopen() or other stream functions, by making the application request a chosen URL or by influencing a server it already contacts, can keep PHP workers busy. Repeated or concurrent requests can cause a denial of service. This issue affects PHP versions from 8.1.32 through 8.1.34, from 8.2.28 before 8.2.36, from 8.3.18 before 8.3.37, from 8.4.5 before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99610

ALSA: caiaq: free the EP4 URB when input setup fails

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: free the EP4 URB when input setup fails The three controllers that use the EP4 input URB allocate it before checking the endpoint type and before registering the input device. On failure they jump to exit_free_idev, which clears cdev->input_dev but leaves cdev->ep4_in_urb set. The card teardown then calls snd_usb_caiaq_input_free(), which returns early because input_dev is NULL, so the URB is never freed. Release the URB before dropping the input device on the error path.

CVSS 3.1 · 2.4 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133607

tianshiyeben wgcloud minTask Endpoint AgentController.java allocation of resources

A vulnerability was determined in tianshiyeben wgcloud up to 4.0.1. This vulnerability affects unknown code of the file AgentController.java of the component minTask Endpoint. Executing a manipulation can lead to allocation of resources. The attack can be executed remotely.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99563

smb: smbdirect: release failed pending sockets of a listener

In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release failed pending sockets of a listener A child of a listener only left the listen.pending or listen.ready list via smbdirect_socket_accept() or when the listener was destroyed. So every connection that failed before it was accepted (negotiate timeout, peer disconnect, invalid negotiate request, ...) stayed on the list and counted against the backlog until the listener was destroyed. After about backlog (10 for ksmbd) such connections smbdirect_listen_connect_request() rejected every new connection with -EBUSY, so an unauthenticated peer was able to permanently stop ksmbd from accepting SMB-Direct connections. Now a failed child moves itself to a new listen.orphaned list at the end of smbdirect_socket_cleanup_work(), after the disconnect was started, and queues listen.purge_orphaned_work, which releases it with smbdirect_socket_release(), without holding the listener's rdma_lock_handler() lock, in the same way smbdirect_socket_destroy() does for the remaining children. Orphaned sockets still count against the backlog until they are released. sc->accept.listener is now only changed under listener->listen.lock and whoever clears it is responsible for releasing the socket: smbdirect_socket_accept(), purge_orphaned_work or the destroy of the listener. In order to make that work: - a struct smbdirect_socket that is a listener is now freed via kfree_rcu(), so that a child can dereference sc->accept.listener under rcu_read_lock(), even if the listener is released concurrently. - smbdirect_listen_connect_request() adds nsc to the listen.pending list and sets nsc->accept.listener before it calls smbdirect_accept_connect_request(), and always returns 0 so the rdma_cm core keeps the connection id and nsc owns it. On a non-zero return it schedules nsc's teardown with smbdirect_socket_schedule_cleanup(), which orphans it off the listener so that purge_orphaned_work releases it; nsc destroys its own connection id with rdma_destroy_id() in that teardown. The teardown has to be deferred because the rdma_cm core holds nsc's id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must not be destroyed synchronously from here. That same handler_mutex (and the listener's) also guarantees nsc can't go away under us, so setting the listener before the call is safe and lets a failure orphan nsc. - smbdirect_accept_negotiate_recv_work() no longer moves a socket to the ready list if it already failed or no longer belongs to the listener. Every accepting socket has a listener, so if sc->accept.listener is already cleared, it no longer sends a negotiate response, as the socket is about to be released. - smbdirect_socket_destroy() of the listener disables purge_orphaned_work and also releases the orphaned sockets.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-121584

Unbounded record hydration in the Playbooks GraphQL runs query

Mattermost versions 11.7.x <= 11.7.11, 11.10.x <= 11.10.2, 11.11.x <= 11.11.1 fail to bound the number of records a single GraphQL request may hydrate which allows an authenticated user to exhaust server memory and cause a denial of service via a small query that repeats the runs field under many aliases. Mattermost Advisory ID: MMSA-2026-00767

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products