Search vulnerabilities

Results 6,945

Export CSV
CVE-2026-132757

GPAC before 26.07.0 NULL Pointer Dereference in DoWriteMeta

GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in DoWriteMeta() in src/isomedia/isom_store.c that allows attackers to crash MP4Box via crafted files. Attackers can supply an ISOBMFF file with a meta box containing an iloc entry but no dref box, crashing MP4Box during rewrite operations like -unhint.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99502

s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix double-free and NULL deref in zpci MSI domain cleanup zpci_remove_parent_msi_domain() dereferences zbus->msi_parent_domain unconditionally and does not clear it afterwards. zpci_bus_create_pci_bus() removes the domain when pci_create_root_bus() fails, then zpci_bus_release() removes it again on the last kref_put(), reading ->fwnode from the freed irq_domain and freeing it twice. If zpci_alloc_domain() or zpci_create_parent_msi_domain() fails, no domain is created at all; zbus is kzalloc'd, so the same release path dereferences NULL. Return early when there is no domain, and clear the pointer after removing one.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99543

backlight: qcom-wled: Fix NULL pointer dereference in wled_remove()

In the Linux kernel, the following vulnerability has been resolved: backlight: qcom-wled: Fix NULL pointer dereference in wled_remove() wled_probe() doesn't set the driver data for the platform device. As a result, platform_get_drvdata() in wled_remove() will return NULL, and the first dereference of it crashes on unbind. Set the platform device driver data in wled_probe().

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99547

thunderbolt: Do not RPM complete unrelated subtrees on unplug

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case.

CVSS 3.1 · 4.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99548

smb: client: fix early procfs exposure race

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix early procfs exposure race Currently, init_cifs() calls cifs_proc_init() near the beginning of the function, before INIT_LIST_HEAD, leading to a momentarily uninitialized, but exposed, procfs. If a userspace process reads this empty procfs, iterating over a zeroed list_head leads to a NULL pointer dereference and a kernel oops/panic. For example, if a delay is added between cifs_proc_init() and INIT_LIST_HEAD, and a userspace process is polling /proc/fs/cifs/DebugData, the following oops occurs: BUG: kernel NULL pointer dereference, address: 0000000000000608 Oops: Oops: 0000 [#1] SMP PTI CPU: 0 UID: 0 PID: 3477 Comm: cat Not tainted 7.3.0-02212-g4df4d2a577db-dirty #6 PREEMPT(lazy) RIP: 0010:cifs_debug_data_proc_show+0x103/0xd80 [cifs] Call Trace: <TASK> ? seq_read_iter+0x86/0x400 ? seq_read_iter+0x86/0x400 seq_read_iter+0x183/0x400 proc_reg_read_iter+0x62/0x90 copy_splice_read+0x215/0x310 splice_file_to_pipe+0xec/0x1c0 do_splice+0x4b8/0x780 __se_sys_splice+0x18f/0x250 do_syscall_64+0x109/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix this by moving cifs_proc_init() down in init_cifs(), ensuring it runs only after all internal lists, locks, counters, and workqueues are fully ready, but before registering the filesystem. Update the error cleanup ladder and exit_cifs() to maintain proper LIFO order.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99549

smb: client: do not pass a NULL buf to is_oplock_break()

In the Linux kernel, the following vulnerability has been resolved: smb: client: do not pass a NULL buf to is_oplock_break() receive_encrypted_read() sets *num_mids = 1 and never writes the caller's bufs[]. Offload returns -1 with *num_mids = 0, so the demultiplex thread skips the frame. The inline decrypt path returns 0 even when smb2_find_mid() fails. cifs_demultiplex_thread() then treats mids[i] == NULL as an oplock break and calls is_oplock_break(bufs[i], server) with bufs[i] still NULL. smb2_is_valid_oplock_break() reads hdr.Command at offset 12 and oopses. A large encrypted READ whose MessageId does not match is enough to panic cifsd. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 100 Comm: cifsd RIP: smb2_is_valid_oplock_break+0xc8/0x2270 [cifs] cifs_demultiplex_thread Kernel panic - not syncing: Fatal exception Return -1 when inline decrypt finds no mid, and skip is_oplock_break() plus the unknown-frame dump when bufs[i] is NULL. receive_encrypted_standard() already assigns bufs[*num_mids].

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99551

ocfs2: drain quorum work before removing the cluster

In the Linux kernel, the following vulnerability has been resolved: ocfs2: drain quorum work before removing the cluster The configured cluster must remain available until an in-flight quorum decision has finished using its fencing method. o2quo_make_decision() drops qs_lock before calling o2quo_fence_self(), which marks heartbeat regions for unclean stop and then reads o2nm_single_cluster->cl_fence_method. Cluster removal clears the singleton without waiting for this independent system-workqueue item. When a failed-quorum decision overlaps removal of the heartbeat regions, nodes and cluster through configfs, the worker can be preempted after marking the regions and resume after the singleton has been cleared: Quorum worker Configfs removal select fence; drop qs_lock o2hb_stop_all_regions() remove regions; join heartbeat threads remove nodes; stop o2net clear singleton; release cluster read cl_fence_method The resumed read dereferences NULL instead of applying the configured fencing method. The heartbeat thread's dependency protects the local node only until the thread exits, and draining o2net does not wait for qs_work. Add o2quo_flush_work() to drain pending or running quorum decisions before clearing the singleton in o2nm_cluster_group_drop_item(). By this point the heartbeat regions and nodes have been removed, so their work publishers are stopped. The worker can finish while the cluster and its configured fencing method remain available. It does not acquire the configfs mutex held by the removal path. Keep o2quo_exit() as the counterpart of o2quo_init() for module teardown and initialization failure, and have it call the same drain helper. Cluster removal uses only the explicitly named drain operation. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc000000011b: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000008d8-0x00000000000008df] CPU: 0 UID: 0 PID: 72 Comm: kworker/0:2 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events o2quo_make_decision RIP: 0010:o2quo_fence_self+0x65/0x200 Register dump omitted. Call Trace: <TASK> o2quo_make_decision+0x345/0x3a0 ? __pfx_o2quo_make_decision+0x10/0x10 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99555

media: usbtv: fix null-pointer dereference on disconnect

In the Linux kernel, the following vulnerability has been resolved: media: usbtv: fix null-pointer dereference on disconnect A null-pointer dereference can occur in usb_make_path() when called from usbtv_querycap() (and other ioctl handlers) during device disconnection. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] RIP: 0010:usb_make_path include/linux/usb.h:985 [inline] RIP: 0010:usbtv_querycap+0x9c/0x100 drivers/media/usb/usbtv/usbtv-video.c:612 ... Call Trace: <TASK> v4l_querycap+0x236/0x470 drivers/media/v4l2-core/v4l2-ioctl.c:1106 __video_do_ioctl+0x8af/0xc70 drivers/media/v4l2-core/v4l2-ioctl.c:3133 video_usercopy+0x860/0x1430 drivers/media/v4l2-core/v4l2-ioctl.c:3475 v4l2_ioctl+0x18d/0x1e0 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 This happens due to a race condition between the USB device disconnect routine (usbtv_disconnect()) and V4L2 ioctls. When the device is disconnected, usbtv_disconnect() sets usbtv->udev = NULL without holding the usbtv->v4l2_lock mutex. Concurrently, an ioctl handler like usbtv_querycap() can be executing under the v4l2_lock and attempt to use usbtv->udev, leading to a crash. To fix this, move the usbtv->udev = NULL assignment into usbtv_video_free() and protect it with mutex_lock(&usbtv->v4l2_lock). This ensures that no non-queue ioctl handler can run concurrently with the pointer being nullified. If an ioctl is already running, the mutex will block the disconnect path until the ioctl finishes. If an ioctl is blocked waiting for the lock, it will acquire it after the disconnect routine releases it, but will then check video_is_registered() (which was cleared by vb2_video_unregister_device()) and safely return -ENODEV. Acquiring v4l2_lock after vb2_video_unregister_device() avoids reintroducing a historical deadlock issue, and usbtv_audio_free() remains safe as it is called before usbtv_video_free().

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99557

ceph: fail readdir when the MDS reply carries no dirfrag

In the Linux kernel, the following vulnerability has been resolved: ceph: fail readdir when the MDS reply carries no dirfrag A ceph mount oopses in ceph_readdir() when the MDS answers a READDIR request with a reply whose extra blob is empty. parse_reply_info() skips reply blobs whose length is zero, so parse_reply_info_readdir() never runs, r_reply_info.dir_dir stays NULL, and the reply still parses as successful. ceph_mdsc_do_request() returns 0 and ceph_readdir() then reads rinfo->dir_dir->frag with no NULL check: /* extra */ ceph_decode_32_safe(&p, end, len, bad); if (len > 0) { ... err = parse_reply_info_extra(&p, p + len, req, features, s); ... } The oops on v7.3.0-rc4-00537-ga3ff15db6820, one getdents64(2) on the mount root after an ms_mode=legacy mount, trimmed: BUG: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 266 Comm: ls Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:ceph_readdir+0xbff/0x3ea0 Call Trace: <TASK> ? __pfx_ceph_readdir+0x10/0x10 wrap_directory_iterator+0xa2/0xe0 iterate_dir+0x1da/0x5d0 __x64_sys_getdents64+0x13b/0x2a0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The unconditional frag read came in with 81c6aea5275ea ("ceph: handle frag mismatch between readdir request and reply"), so the bug is old. Treat a reply with no dirfrag as a protocol violation: warn once, drop the request and return -EIO, the same way ceph_readdir() already handles the two malformed-reply cases later in the function. Tested on v7.3.0-rc4-00537-ga3ff15db6820 (KASAN). Unpatched, the getdents64(2) above takes the machine down (oops=panic) on the first READDIR reply. With the patch it warns once and getdents64(2) returns -EIO, no oops, no hang. A conformant reply for an empty directory — dirfrag present, zero entries, FRAG_END|FRAG_COMPLETE — still lists "." and ".." and returns EOF on both kernels, so normal readdir behavior is unchanged. The oops is still present in v7.3-rc5 (72d3fcf802c45).

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99558

blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key()

In the Linux kernel, the following vulnerability has been resolved: blk-crypto: fix NULL deref and UAF in __blk_crypto_evict_key() Sashiko reported a possible NULL pointer dereference, triggered by the following flow: dm-inlinecrypt ctor # first use of the fallback ├─ blk_crypto_init_key() # succeeds, ctx->key.size != 0 ├─ blk_crypto_start_using_key() │ ├─ hw-wrapped key: -EOPNOTSUPP │ │ # profile never allocated (NULL) │ └─ raw key: fallback_start_using_mode() │ └─ blk_crypto_fallback_init() fails │ └─ kfree(profile) # not NULLed ├─ goto bad └─ inlinecrypt_dtr() # evicts whenever key.size is set └─ blk_crypto_evict_key() └─ blk_crypto_config_supported_natively() = false └─ blk_crypto_fallback_evict_key() └─ __blk_crypto_evict_key(blk_crypto_fallback_profile) └─ profile->num_slots # BOOM!!! This issue can be reproduced using the following commands: dd if=/dev/zero of=/tmp/backing bs=1M count=64 LOOP=$(losetup -f --show /tmp/backing) SZ=$(blockdev --getsz $LOOP) KEY=$(head -c 64 /dev/urandom | od -An -tx1 | tr -d ' \n') dmsetup create ic --table "0 $SZ inlinecrypt aes-xts-plain64 \ $KEY 0 $LOOP 0 1 keytype:hw-wrapped" And the following oops is triggered: ================================================================== blk-crypto: loop0: no support for wrapped keys Oops: general protection fault, probably for non-canonical address 0xdffffc000000000b: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000058-0x000000000000005f] CPU: 5 UID: 0 PID: 901 Comm: dmsetup 7.3.0-rc3 #1 PREEMPT(lazy) RIP: 0010:__blk_crypto_evict_key+0x2e/0x3b0 Call Trace: blk_crypto_evict_key+0x24c/0x320 inlinecrypt_dtr+0xf6/0x160 inlinecrypt_ctr+0x2d3/0xbd0 dm_table_add_target+0x661/0xf40 table_load+0x1c4/0x490 ctl_ioctl+0x32f/0x5f0 dm_ctl_ioctl+0xe/0x20 ================================================================== dm-inlinecrypt is the only caller that can evict a key that was never started, as fscrypt frees such a key without evicting it. Fix this by returning early from blk_crypto_fallback_evict_key() when tfms_inited[] is not set for the key's mode. tfms_inited[] is only set after blk_crypto_fallback_init() has successfully initialized the profile, so the crash above is no longer reachable. The bug has been latent since commit c984ff1423ae ("blk-crypto: dynamically allocate fallback profile") was merged in v6.5, and only became actually triggerable when commit e7f57d2c47e2 ("dm-inlinecrypt: add target for inline block device encryption") was merged in v7.2.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99560

wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up. On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI and crashes: BUG: kernel NULL pointer dereference, address: 0000000000000a40 Workqueue: mt76 mt7925_mac_reset_work [mt7925_common] RIP: 0010:mutex_lock+0x1c/0x50 Call Trace: napi_disable+0x1d/0x50 mt7925e_mac_reset+0x327/0x420 [mt7925e] mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common] Remove the WM2 mask from mt7925_irq_map and from MT7925_INT_RX_DONE_ALL.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130669

ImageMagick before 7.1.2-35 Null Pointer Dereference via -subimage Option

ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service.

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99673

can: replace ARPHRD_CAN type checks with can_get_ml_priv()

In the Linux kernel, the following vulnerability has been resolved: can: replace ARPHRD_CAN type checks with can_get_ml_priv() Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") introduced an explicit way to assign the midlayer private pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer returned by can_get_ml_priv() therefore identifies a real CAN device. The referenced commit only converted the j1939 and proc code to this check, while the other parts of the CAN subsystem still rely on dev->type == ARPHRD_CAN. The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed netdevice passes the ARPHRD_CAN checks. Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") already made can_rx_register() reject such devices. But can_rx_unregister() still only checks dev->type and dereferences the NULL ml_priv when it walks the receive lists of the device. CAN_ISOTP reaches this path: isotp_bind() ignores the return values of can_rx_register() and binds the socket anyway. When the socket is released or the device is unregistered, isotp_release() and isotp_notify() remove the filters that have never been registered and trigger the NULL pointer dereference in can_rx_unregister(). This only requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged user namespace. Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and raw to can_get_ml_priv().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99697

mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg

In the Linux kernel, the following vulnerability has been resolved: mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg When memory.high is exceeded in non-task context, try_charge_memcg() schedules memcg->high_work without taking a reference on the memcg, and high_work_func() invokes reclaim_high() without pinning the memcg. With obj_cgroup reparenting, introduced in commit bf4f059954dc ("mm: memcg/slab: obj_cgroup API"), objects charged to a child memcg are reparented to its parent in mem_cgroup_css_offline() instead of holding a reference on the child until uncharged. Subsequent uncharges of those objects go to the parent, which can leave the child's memory use permanently above its high limit, so any later charge on the offlined memcg in non-task context schedules high_work. This was later widened from kernel memory to LRU folios when commit f1cf8d2f36dc ("mm: memcontrol: eliminate the problem of dying memory cgroup for LRU folios") converted LRU folios to use obj_cgroup reparenting. cancel_work_sync(&memcg->high_work) only runs at the end of teardown in mem_cgroup_css_free(), so high_work_func() can start or still be running reclaim_high() after mem_cgroup_css_released() or shrink_many() has called lru_gen_release_memcg() and unhashed lruvec->lrugen.list. If reclaim tries to rotate the memcg, lru_gen_rotate_memcg() dereferences a NULL pprev pointer. This issue is specific to MGLRU and was introduced with the memcg LRU in commit e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists"). With either traditional LRU or MGLRU, css_free_rwork_fn() calls css_rstat_exit() which frees per-CPU rstat data before calling mem_cgroup_css_free(). If reclaim_high() is still running, rstat updates via mod_lruvec_state() -> __css_rstat_updated() cause a use-after-free on the per-CPU rstat data. This was introduced when commit 5da3bfa029d6 ("cgroup: use separate rstat trees for each subsystem") moved css_rstat_exit() ahead of ss->css_free(). Fix both problems by acquiring a reference with css_tryget_online() in high_work_func() before calling reclaim_high(), and by resetting memory.high and swap.high to PAGE_COUNTER_MAX in mem_cgroup_css_offline() so that charges via references on an offlined memcg do not trigger high_work on the dead child and skip checking live ancestors in try_charge_memcg(). Acquiring the reference in high_work_func() rather than before scheduling high_work is safe because mem_cgroup_css_free() calls irq_work_sync() and cancel_work_sync() which cancels pending work and waits for an already running high_work_func() to complete before mem_cgroup_free() frees the memcg. css_tryget_online() uses percpu_ref_tryget_live() and is safe to call after percpu_ref_exit() before the cgroup is freed unlike css_tryget(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 27 Comm: kworker/1:0 Tainted: G B W 7.3.0-rc5-g2bba28e98578 #284 PREEMPT(full) Tainted: [B]=BAD_PAGE, [W]=WARN <-- Taint from lru_gen_rotate_memcg() VM_WARN_ON_ONCE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events high_work_func RIP: 0010:lru_gen_rotate_memcg+0x1a3/0xe90 Call Trace: <TASK> ? read_ctrl_pos+0x22f/0x3f0 shrink_lruvec+0x16cb/0x1b80 ? ret_from_fork_asm+0x1a/0x30 ? lapic_next_event+0x15/0x20 ? clockevents_program_event+0x2bb/0x6f0 ? lapic_next_event+0x15/0x20 ? __pfx_shrink_lruvec+0x10/0x10 ? __pfx_clockevents_program_event+0x10/0x10 ? _raw_spin_lock+0x84/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? kasan_save_stack+0x30/0x50 ? psi_group_change+0x381/0x740 ? __pfx_sched_clock_cpu+0x10/0x10 ? save_fpregs_to_fpstate+0xc4/0x2c0 ? finish_task_switch.isra.0+0x1de/0xac0 ? __schedule+0xf62/0x42c0 ? __pfx___schedule+0x10/0x10 ? __pfx___irq_work_queue_lo ---truncated---

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99715

nvme-rdma: fix NULL queue->ctrl dereference on reconnect

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix NULL queue->ctrl dereference on reconnect Since commit 2a8513091d2f ("nvme-rdma: parallelize I/O queue allocation and startup"), a reconnect that gets more I/O queues than before grows the tag set before the new queues are set up. queue->ctrl is only set by nvme_rdma_setup_io_queues(), so I/O submitted in between reaches nvme_rdma_queue_rq() on a queue that was never allocated and dereferences a NULL queue->ctrl: BUG: kernel NULL pointer dereference, address: 000000000000034c RIP: 0010:nvme_rdma_queue_rq+0x52/0xb90 Set queue->ctrl for every queue when allocating the controller. Such requests are then requeued like on any other queue that is not live.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131196

Denial of Service (DoS) through Splunk-to-Splunk Data Forwarding in Splunk Enterprise

In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user who can connect to a Splunk-to-Splunk (S2S) data forwarding receiver could cause the Splunk daemon to terminate unexpectedly. The unexpected termination interrupts data indexing and access to the management API and Splunk Web until the Splunk Enterprise process restarts. The vulnerability is possible because the S2S data forwarding receiver does not validate an optional field in forwarded event data, which results in a null pointer dereference when the field is missing. For more information see Intermediate data routing using universal and heavy forwarders (https://help.splunk.com/en/splunk-enterprise/get-started/splunk-validated-architectures/getting-data-in-forwarding-and-preprocessing/intermediate-data-routing-using-universal-and-heavy-forwarders) in the Splunk documentation.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99632

drm/amdkfd: use the queue's process info for the WPTR BO eviction fence

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: use the queue's process info for the WPTR BO eviction fence amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo is the VM which opened the BO last, not necessarily the KFD process' VM, and a render node VM has no process info. On navi31, an unprivileged process which exports its WPTR BO with AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd oopses in AMDKFD_IOC_CREATE_QUEUE: BUG: kernel NULL pointer dereference, address: 0000000000000060 RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu] init_user_queue.part.0+0x180/0x250 [amdgpu] pqm_create_queue+0x32d/0x730 [amdgpu] kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu] Pass the process info of the queue instead. With the fix, the queue is created and destroyed normally. (cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99584

f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99605

drm/etnaviv: Fix NULL dereference on unbind without PPU flop reset

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Fix NULL dereference on unbind without PPU flop reset flop_reset_data_ppu is only allocated on GPUs that need the PPU flop reset. However, etnaviv_unbind(..) frees it unconditionally, and etnaviv_cmdbuf_free(..) dereferences cmdbuf->suballoc before checking whether cmdbuf is NULL. As a result, unloading the driver on GPUs that do not need the PPU flop reset causes a NULL pointer dereference at address 0.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99613

ALSA: cs46xx: Handle SCB creation failures before dereferencing

In the Linux kernel, the following vulnerability has been resolved: ALSA: cs46xx: Handle SCB creation failures before dereferencing With CONFIG_PM_SLEEP enabled, cs46xx_dsp_create_scb() can return NULL if kmemdup() fails to allocate the SCB data saved for resume. cs46xx_dsp_scb_and_task_init() and _dsp_create_generic_scb() dereference the returned pointer without checking it, causing a NULL pointer dereference on allocation failure. Check both return values before accessing the SCB descriptors. Return -ENOMEM when creating the null SCB fails and propagate NULL from _dsp_create_generic_scb(). Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products