Search vulnerabilities

Results 3,045

Export CSV
CVE-2026-102280

Sandboxie-Plus: Sandbox containment bypass

Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-22017

devlink: fix xa_alloc_cyclic() error handling

In the Linux kernel, the following vulnerability has been resolved: devlink: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (rel). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-22016

dpll: fix xa_alloc_cyclic() error handling

In the Linux kernel, the following vulnerability has been resolved: dpll: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (pin). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-0060

Android Graphics Driver Update Denial of Service

In updateState of GraphicsDriverEnableAngleAsSystemDriverController.java, there is a possible persistent dos issue due to an unusual root cause. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-5987

Libssh: invalid return code for chacha20 poly1305 with openssl backend

A flaw was found in libssh when using the ChaCha20 cipher with the OpenSSL library. If an attacker manages to exhaust the heap space, this error is not detected and may lead to libssh using a partially initialized cipher context. This occurs because the OpenSSL error code returned aliases with the SSH_OK code, resulting in libssh not properly detecting the error returned by the OpenSSL library. This issue can lead to undefined behavior, including compromised data confidentiality and integrity or crashes.

CVSS 3.1 · 8.1 High EPSS 1.7% KEV · Not listed
Vendors
CVE-2025-26465

Openssh: machine-in-the-middle attack if verifyhostkeydns is enabled

A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high.

CVSS 3.1 · 6.8 Medium EPSS 7.7% KEV · Not listed
Vendors
Debian Netapp Openbsd and 1 more
CVE-2024-12086

Rsync: rsync server leaks arbitrary client files

A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client.

CVSS 3.1 · 6.1 Medium EPSS 1.8% KEV · Not listed
Vendors
Products
Almalinux Arch Linux Linux and 10 more
CVE-2026-99221

keys/trusted_keys: return immediately after TPM unseal failure

In the Linux kernel, the following vulnerability has been resolved: keys/trusted_keys: return immediately after TPM unseal failure trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error.

CVSS 3.1 · 3.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98857

ipvs: bound LBLCR and LBLC cache growth

In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98825

rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe()

In the Linux kernel, the following vulnerability has been resolved: rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe() devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight into clk_get_rate() without checking it for an error first, unlike the "rtc" clock a few lines above which is correctly checked with IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error pointer: if (!clk) return 0; ... rate = clk_core_get_rate_recalc(clk->core); so if devm_clk_get() ever returns an error pointer here (for example ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the clkcfg clock-provider this RTC depends on has not registered its clocks yet by the time this driver probes), clk_get_rate() dereferences that error pointer instead of returning 0, crashing instead of letting probe defer. Capture the clock in the existing 'clk' local and check it with IS_ERR() before calling clk_get_rate(), matching the handling already used for the "rtc" clock in this same function.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98767

usb: dwc3: gadget: fix IRQ storm on invalid event buffer count

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: fix IRQ storm on invalid event buffer count When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note_interrupt+0x340/0x468 handle_irq_event+0xac/0xc0 handle_fasteoi_irq+0x120/0x228 gic_handle_irq+0x68/0x108 ... kernel BUG at kernel/irq/spurious.c:184 To reproduce, write a bogus value exceeding the event buffer length directly to the GEVNTCOUNT register: devmem <DWC3_BASE + 0xc40c> 4 0x1004 Write the bogus count back to GEVNTCOUNT to clear the IRQ source, consistent with the stale event clearing pattern in dwc3_event_buffers_setup(), and schedule error recovery to reinitialize the controller.

CVSS 3.1 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-98761

usb: typec: tcpm: recover after failure to start the frs ams

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: recover after failure to start the frs ams Reset the port if the tcpm fails to start the FAST_ROLE_SWAP AMS by initiating error recovery on it. This helps in cases where some cables (incorrectly) signal an FRS to an FRS capable port during disconnection. The TCPC autonomously starts sourcing VBUS on detecting the FRS signal. However, the VBUS sourcing is left on when the FAST_ROLE_SWAP AMS fails to start (as tcpm_sink_tx_ok is 0 as CC is open due to the cable disconnect). This is because the code sets the state to INVALID_STATE without resetting the port state. Log snippet before changes: [ 101.401960] AMS FAST_ROLE_SWAP start [ 101.401971] Sink TX No Go [ 101.401982] sourcing vbus [ 101.401987] VBUS on [ 101.402159] VBUS on [ 109.257809] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_READY, polarity 1, disconnected] [ 111.267442] VBUS on After changes: [ 70.541211] AMS FAST_ROLE_SWAP start [ 70.541220] Sink TX No Go [ 70.541228] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS] [ 70.541362] VBUS on [ 70.541365] sourcing vbus [ 70.541367] VBUS on [ 70.541374] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS] [ 70.541410] disable vbus discharge ret:0 [ 70.543028] Setting usb_comm capable false [ 70.544009] Setting voltage/current limit 0 mV 0 mA [ 70.544034] polarity 0 [ 70.544239] Requesting mux state 0, usb-role 0, orientation 0 [ 70.555550] cc:=0 [ 70.555595] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [ 70.555697] VBUS off [ 70.555702] VBUS VSAFE0V [ 70.555762] CC1: 5 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 70.587794] VBUS off [ 70.587799] VBUS VSAFE0V [ 70.655672] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 70.655682] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev3 NONE_AMS] [ 70.655686] Start toggling [ 70.656274] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]

CVSS 3.1 · 4.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93168

dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout

In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu to busy wait around 7 minutes in the timeout case. After applying this patch with delay_us=10 the measured timeout was 1053428 microseconds which is roughly equivalent to the expected 1000000 microseconds specified in XILINX_DMA_LOOP_COUNT. Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90187

null_blk: free zones array on device power-off

In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no longer necessary because every caller already invokes null_del_dev() first: via nullb_group_drop_item() before nullb_device_release(), in the null_add_dev() error path of null_create_dev(), and in null_destroy_dev(). Remove the redundant call. And take &lock around zone_cond_store() in the two store wrappers to serialize dev->zones check-and-deref against its alloc/free, which already run under &lock. The reason there was no problem before is that only nullb_device_release() or null_exit() frees the dev->zones, which guarantees that subsequent users won't access the configfs interface.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90179

apparmor: fix deadlock in complain-mode change_hat

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present: 7.2-rc7 vanilla -> affected checked also some other kernels: 6.18.44 vanilla -> affected 6.12.95 with debian patches -> unaffected On systems without bug (for example 6.12.95 debian) it just prints: aa_change_hat rc=0 On systems with bug, the executable always hangs, prints nothing and becomes unkillable. (And once stuck this way, it will cause any further hat changes to also cause the changing process to get stuck) Then in syslog you can find hint about cause: kernel: INFO: task hat:3409 blocked for more than 483 seconds. kernel: Not tainted 7.2.0-rc7 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800 kernel: Call Trace: kernel: <TASK> kernel: __schedule+0x48f/0xfe0 kernel: schedule+0x27/0xa0 kernel: schedule_preempt_disabled+0x15/0x30 kernel: __mutex_lock.constprop.0+0x569/0xa10 kernel: aa_new_learning_profile+0x15f/0x210 kernel: build_change_hat+0x19f/0x3b0 kernel: change_hat.isra.0+0x5dd/0xd60 kernel: aa_change_hat+0x2f3/0x710 kernel: aa_setprocattr_changehat+0x121/0x1f0 kernel: do_setattr+0x28c/0x340 kernel: apparmor_setselfattr+0x20/0x50 kernel: security_setselfattr+0xf6/0x110 kernel: __x64_sys_lsm_set_self_attr+0x53/0x90 kernel: do_syscall_64+0xdd/0x5e0 kernel: ? __mod_memcg_lruvec_state+0xfd/0x260 kernel: ? lruvec_stat_mod_folio+0x8d/0xd0 kernel: ? __folio_mod_stat+0x2d/0x90 kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0 kernel: ? do_anonymous_page+0x184/0xa10 kernel: ? __handle_mm_fault+0x805/0x870 kernel: ? count_memcg_events+0xef/0x230 kernel: ? handle_mm_fault+0x1f0/0x2f0 kernel: ? do_user_addr_fault+0x2bb/0x7b0 kernel: ? do_syscall_64+0x94/0x5e0 kernel: ? exc_page_fault+0x75/0x160 kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e kernel: RIP: 0033:0x7f815e134c8d kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064 kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010 kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064 kernel: </TASK> kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409. To fix the issue, lift the locking out of the core of aa_new_learning_profile(), introduce a wrapper function that takes the lock where needed, and have build_change_hat() call the core function that no longer takes the lock. In addition fix 4 other issues introduced by commit 32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles") - aa_get_profile_rcu() was replaced-by: aa_get_profile without the accompanying rcu_dereference_protected() - an extra aa_get_label(label) was introduced at the start of change_hat() without an accompanying aa_put_label() causing a reference count leak. - a reference count leak was introduced in the label_is_stale(label) case, where the newest profile would be leaked instead of the label passed to the function. - a potential UAF when the lookup walks up the tree with new_ns != ns the new label refere ---truncated---

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43244

kcm: fix zero-frag skb in frag_list on partial sendmsg error

In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43204

ASoC: qcom: q6asm: drop DSP responses for closed data streams

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71289

fs/ntfs3: handle attr_set_size() errors when truncating files

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99137

cifs: don't update i_size in cifs_do_truncate without a cached handle

In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size.

CVSS 3.1 · 3.6 Low EPSS < 1% KEV · Not listed
Vendors
Products