An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, Modem 5123, and Modem 5300. The baseband software does not properly check the length specified by the MM (Mobility Management) module, which can lead to Denial of Service.
Search vulnerabilities
A vulnerability exists in the ICCP stack of the affected SYS600 versions due to validation flaw in the process that establishes the ICCP communication. The validation flaw will cause a denial-of-service when ICCP of SYS600 is request to forward any da ...
Improper Input Validation vulnerability exists in the Hitachi Energy MicroSCADA X SYS600's ICCP stack during the ICCP communication establishment causes a denial-of-service when ICCP of SYS600 is request to forward any data item updates with timestamps too distant in the future to any remote ICCP system. By default, ICCP is not configured and not enabled. This issue affects: Hitachi Energy MicroSCADA X SYS600 version 10.2 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*
An Unchecked Input for Loop Condition in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to cause IO devices that use the library to enter an infinite loop by sending a malicious RPC packet.
A lack of length validation in Snippet descriptions in GitLab CE/EE affecting all versions prior to 15.1.6, 15.2 prior to 15.2.4 and 15.3 prior to 15.3.2 allows an authenticated attacker to create a maliciously large Snippet which when requested with or without authentication places excessive load on the server, potential leading to Denial of Service.
NamelessMC Has Lack of Length Validation for s Parameter in GET Requests
NamelessMC is a free, easy to use & powerful website software for Minecraft servers. In version 2.1.4 and prior, the s parameter in GET requests for forum search functionality lacks length validation, allowing attackers to submit excessively long search queries. This oversight can lead to performance degradation and potential denial-of-service (DoS) attacks. This issue has been patched in version 2.2.0.
An issue was discovered in GoBGP before 3.35.0. An attacker can cause a crash in the pkg/packet/bgp/bgp.go flowspec parser by sending fewer than 20 bytes in a certain context.
An issue was discovered in GoBGP before 3.35.0. pkg/packet/mrt/mrt.go does not properly check the input length, e.g., by ensuring that there are 12 bytes or 36 bytes (depending on the address family).
In SecurityCommand message after as security has been actived., there is a possible improper input validation. This could lead to remote information disclosure no additional execution privileges needed
mac80211: fix skb length check in ieee80211_scan_rx()
In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message]
In process_service_search_rsp of sdp_discovery.cc, there is a possible out of bounds read due to improper input validation. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-225876506
DexLoader function get_stringidx_fromdex() in Redex prior to commit 3b44c64 can load an out of bound address when loading the string index table, potentially allowing remote code execution during processing of a 3rd party Android APK file.
Improper Validation of Specified Quantity in Input in tooljet/tooljet
Unrestricted file size limit can lead to DoS in tooljet/tooljet <1.27 by allowing a logged in attacker to upload profile pictures over 2MB.
Unauthenticated control plane denial of service attack in Istio
Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, `istiod`, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing. This endpoint is served over TLS port 15012, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [multicluster](https://istio.io/latest/docs/setup/install/multicluster/primary-remote/) topologies, this port is exposed over the public internet. There are no effective workarounds, beyond upgrading. Limiting network access to Istiod to the minimal set of clients can help lessen the scope of the vulnerability to some extent.
Buffer overflow in TCP syslog server (receiver) components in rsyslog
Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability.
AES Crypt for Linux Password Security Vulnerability
AES Crypt is a file encryption software for multiple platforms. AES Crypt for Linux built using the source on GitHub and having the version number 3.11 has a vulnerability with respect to reading user-provided passwords and confirmations via command-line prompts. Passwords lengths were not checked before being read. This vulnerability may lead to buffer overruns. This does _not_ affect source code found on aescrypt.com, nor is the vulnerability present when providing a password or a key via the `-p` or `-k` command-line options. The problem was fixed via in commit 68761851b and will be included in release 3.16. Users are advised to upgrade. Users unable to upgrade should us the `-p` or `-k` options to provide a password or key.
Parse Server crashes when receiving file download request with invalid byte range
Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Versions prior to 4.10.17, and prior to 5.2.8 on the 5.x branch, crash when a file download request is received with an invalid byte range, resulting in a Denial of Service. This issue has been patched in versions 4.10.17, and 5.2.8. There are no known workarounds.
Abort caused by allocating a vector that is too large in Tensorflow
Tensorflow is an Open Source Machine Learning Framework. During shape inference, TensorFlow can allocate a large vector based on a value from a tensor controlled by the user. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
Missing validation causes denial of service in TensorFlow via `LSTMBlockCell`
TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.LSTMBlockCell` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate the ranks of any of the arguments to this API call. This results in `CHECK`-failures when the elements of the tensor are accessed. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue.
Missing validation causes denial of service in TensorFlow via `Conv3DBackpropFilterV2`
TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.Conv3DBackpropFilterV2` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate that the `filter_sizes` argument is a vector. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue.
Denial of service in TensorFlow due to lack of validation in `tf.ragged.constant`
TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.ragged.constant` does not fully validate the input arguments. This results in a denial of service by consuming all available memory. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue.