Search vulnerabilities

Results 2,321

Export CSV
CVE-2026-64020

nvme-pci: fix dma_vecs leak on p2p memory

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64019

nvme-pci: fix dma mapping leak on data setup error

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma mapping leak on data setup error We're leaking the initial DMA mapping during iteration if we fail to allocate the tracking descriptor for both PRP and SGL. Unmap the iterator directly; we can't use the existing unmap helper because it depends on the tracking descriptor being successfully allocated, so a new one for an in-use iterator is provided. The mappings were also leaking when the driver detects an invalid bio_vec when mapping PRPs, so fix that too.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-64013

ACPI: button: Fix ACPI GPE handler leak during removal

In the Linux kernel, the following vulnerability has been resolved: ACPI: button: Fix ACPI GPE handler leak during removal Commit a7e23ec17fee ("ACPI: button: Install notifier for system events as well") changed the ACPI notify handler type for ACPI buttons to ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect that change. This leads to leaking the notify handler past driver removal, which may cause a kernel crash to occur if ACPI notify on the given device is triggered after removing the driver, and causes a subsequent probe of the given device with the same driver to fail. Address this by updating the acpi_remove_notify_handler() call in acpi_button_remove() as appropriate.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53308

power: supply: max77705: Free allocated workqueue and fix removal order

In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Free allocated workqueue and fix removal order Use devm interface for allocating workqueue to fix two bugs at the same time: 1. Driver leaks the memory on remove(), because the workqueue is not destroyed. 2. Driver allocates workqueue and then registers interrupt handlers with devm interface. This means that probe error paths will not use a reversed order, but first destroy the workqueue and then, via devm release handlers, free the interrupt. The interrupt handler schedules work on this exact workqueue, thus if interrupt is hit in this short time window - after destroying workqueue, but before devm() frees the interrupt - the schedulled work will lead to use of freed memory. Change is not equivalent in the workqueue itself: use non-legacy API which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is used to update power supply (power_supply_changed()) status, thus there is no point to run it for memory reclaim. Note that dev_name() is not directly used in second argument to prevent possible unlikely parsing any "%" character in device name as format.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-53222

ptp: ocp: fix resource freeing order

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: fix resource freeing order Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events") added a call to ptp_disable_all_events() which changes the configuration of pins if they support EXTTS events. In ptp_ocp_detach() pins resources are freed before ptp_clock_unregister() and it leads to use-after-free during driver removal. Fix it by changing the order of free/unregister calls. To avoid irq handler running on the other core while ptp device unregistering, call synchronize_irq() after HW is configured to stop producing irqs and no irqs are in-flight.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109262

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 Memory Leak in SVG Encoder

ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a memory leak in the SVG encoder (WriteSVGImage) that fails to release allocated memory when handling crafted images. Attackers can supply crafted image files that are processed by the SVG encoder to leak memory and cause a denial of service through resource consumption.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46303

isofs: validate Rock Ridge CE continuation extent against volume size

In the Linux kernel, the following vulnerability has been resolved: isofs: validate Rock Ridge CE continuation extent against volume size rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43502

net/rds: handle zerocopy send cleanup before the message is queued

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31737

net: ftgmac100: fix ring allocation unwind on open failure

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31711

smb: server: fix active_num_conn leak on transport allocation failure

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31658

net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-23339

nfc: nci: free skb on nci_transceive early error paths

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free skb on nci_transceive early error paths nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-23095

gue: Fix skb memleak with inner IP protocol 0.

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-23038

pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()

In the Linux kernel, the following vulnerability has been resolved: pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node() In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails, the function jumps to the out_scratch label without freeing the already allocated dsaddrs list, leading to a memory leak. Fix this by jumping to the out_err_drain_dsaddrs label, which properly frees the dsaddrs list before cleaning up other resources.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-23026

dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config()

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config() Fix a memory leak in gpi_peripheral_config() where the original memory pointed to by gchan->config could be lost if krealloc() fails. The issue occurs when: 1. gchan->config points to previously allocated memory 2. krealloc() fails and returns NULL 3. The function directly assigns NULL to gchan->config, losing the reference to the original memory 4. The original memory becomes unreachable and cannot be freed Fix this by using a temporary variable to hold the krealloc() result and only updating gchan->config when the allocation succeeds. Found via static analysis and code review.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71189

dmaengine: dw: dmamux: fix OF node leak on route allocation failure

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw: dmamux: fix OF node leak on route allocation failure Make sure to drop the reference taken to the DMA master OF node also on late route allocation failures.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71186

dmaengine: stm32: dmamux: fix device leak on route allocation

In the Linux kernel, the following vulnerability has been resolved: dmaengine: stm32: dmamux: fix device leak on route allocation Make sure to drop the reference taken when looking up the DMA mux platform device during route allocation. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71185

dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation Make sure to drop the reference taken when looking up the crossbar platform device during am335x route allocation.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-71163

dmaengine: idxd: fix device leaks on compat bind and unbind

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix device leaks on compat bind and unbind Make sure to drop the reference taken when looking up the idxd device as part of the compat bind and unbind sysfs interface.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-39845

x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()

In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors