Search vulnerabilities

Results 56,045

Export CSV
CVE-2026-99306

ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks

In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99304

ceph: fix integer overflow in the snap trace bounds check

In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99297

media: em28xx: fix double free in em28xx_alloc_urbs

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99296

libceph: bound mon_command ack decode to front len

In the Linux kernel, the following vulnerability has been resolved: libceph: bound mon_command ack decode to front len handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it. req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults: rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99292

smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl() In id_mode_to_cifs_acl(), while the chown branch reserves sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_acl) and the worst-case ACE space after commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or 5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace) on posix). However, the chmod branch also invokes build_sec_desc() -> copy_sec_desc(), which unconditionally writes the Owner SID at pnntsd + sidsoffset and the Group SID at pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total), and set_chmod_dacl() always writes a struct smb_acl header (8 bytes) even when the source descriptor has dacloffset == 0. When a security descriptor has compact or overlapping Owner/Group SIDs (or dacloffset == 0), calling chmod() under-allocates pnntsd and writes past the end of the slab buffer. Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_ntsd) on the posix path) in the chmod branch of id_mode_to_cifs_acl().

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99291

ksmbd: fix SMB2 CREATE response buffer overflow

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-13407

Royal Elementor Addons < 1.7.1067 - Unauthenticated Stored HTML Injection in Form Notification Emails

The Royal Elementor Addons WordPress plugin before 1.7.1067 does not properly sanitize and escape values submitted through its form widget before including them in the body of administrator notification emails, allowing unauthenticated attackers to inject arbitrary HTML into emails sent to the site administrator on form submission.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
CVE-2026-109908

X.Org libfontenc File Parsing Validation Failure

A heap buffer overflow in reading encoding files in X.Org libfontenc before 1.11.0 could be used by local attackers able to inject enc files to the X server could crash or escalate privileges.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109909

libXfont2 PCF Font Parsing Negative Skip Out-Of-Bounds Read

A out of bounds read after using negative integers during offset calculation during PCF decoding in X.Org libXfont before 2.0.10 could be used by authenticated X clients to crash the X server or expose sensitive information in its memory.

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-111257

Apache TomEE: Well-known administrative credentials created at startup

With the default configuration and no users defined in the default user database, TomEE silently adds an administrative user with a well-known password at startup. A remote attacker can use these credentials to authenticate to web applications that use the default realm and grant access to any authenticated user or to the TomEE administrative role. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-111249

Apache TomEE: Unauthenticated LiveReload endpoint reachable from the network

The development-time LiveReload support listens on all network interfaces without authentication and accepts websocket connections from any origin. A network attacker, or a web page visited by the developer, can observe the names of changed files in the watched folder and the server version, and reach the deployed applications through the additional port. This only affects LiveReload enabled in the embedded Maven plugin. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109806

Multiple Vulnerabilities in SAP NetWeaver (Internet Graphics Service)

SAP NetWeaver (Internet Graphics Service) does not sufficiently validate certain input values within incoming requests. An unauthenticated user could send a specially crafted request containing malformed image data, triggering an integer overflow that leads to repeated termination of the worker process. This results in a high impact on availability with no impact on integrity or confidentiality.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Sap
Products
CVE-2026-109807

Multiple Vulnerabilities in SAP NetWeaver (Internet Graphics Service)

SAP NetWeaver (Internet Graphics Service) does not sufficiently validate certain input values within incoming requests. An unauthenticated user could send a specially crafted request causing the affected process to read beyond the declared values, resulting in repeated termination of the worker process. This results in a high impact on availability with no impact on integrity or confidentiality.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Sap
Products
CVE-2026-120010

Memory Corruption vulnerability in SAP NetWeaver Application Server (SAP Message Server)

SAP NetWeaver Application Server (SAP Message Server) does not properly size memory allocations when handling certain HTTP requests. An unauthenticated attacker could send a specially crafted request to trigger a heap buffer overflow in affected functionality. Successful exploitation causes the component to abort and remain unavailable until it is restarted by the framework, resulting in a high impact on availability of the system. There is no impact on confidentiality and integrity of the application.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Sap
CVE-2026-109797

Cross-tenant sandbox takeover in SAP/astonish

In SAP/astonish, an authenticated user could potentially identify and operate on another team�s sandbox containers because of improper tenant isolation in the legacy Incus sandbox-management API handlers. The affected handlers did not use the tenant-aware session lookup path, allowing cross-tenant container operations such as listing, exposing or proxying, and deleting containers.The issue affects only the legacy Incus backend. Kubernetes and OpenShell deployments are not affected because the relevant Incus-specific handlers are unavailable there.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Sap
Products
CVE-2026-97849

Apache TomEE: Derby network service listens on all interfaces

The embedded Derby network service ignores its configured bind address and listens on all network interfaces. When the service is enabled, a remote attacker with network access can connect to the database server and read or modify data. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-97402

BLE Advertising Payload Infinite Loop Causes CPU Exhaustion

In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126050

apitrace 2.0 through 14.0 Heap Buffer Overflow via SnappyFile::flushReadCache()

apitrace 2.0 through 14.0 contains a heap-based buffer overflow in SnappyFile::flushReadCache() that allows attackers to write past m_compressedCache via an oversized compressed chunk length. Attackers can supply a crafted .trace file whose 4-byte chunk length exceeds the fixed buffer size, corrupting heap memory when users dump, inspect, or replay it.

CVSS 4.0 · 8.5 High EPSS < 1% KEV · Not listed
Vendors
Products