Search vulnerabilities

Results 302

Export CSV
CVE-2026-23397

nfnetlink_osf: validate individual option lengths in fingerprints

In the Linux kernel, the following vulnerability has been resolved: nfnetlink_osf: validate individual option lengths in fingerprints nfnl_osf_add_callback() validates opt_num bounds and string NUL-termination but does not check individual option length fields. A zero-length option causes nf_osf_match_one() to enter the option matching loop even when foptsize sums to zero, which matches packets with no TCP options where ctx->optp is NULL: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:227) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:293) nf_hook_slow (net/netfilter/core.c:623) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) Additionally, an MSS option (kind=2) with length < 4 causes out-of-bounds reads when nf_osf_match_one() unconditionally accesses optp[2] and optp[3] for MSS value extraction. While RFC 9293 section 3.2 specifies that the MSS option is always exactly 4 bytes (Kind=2, Length=4), the check uses "< 4" rather than "!= 4" because lengths greater than 4 do not cause memory safety issues -- the buffer is guaranteed to be at least foptsize bytes by the ctx->optsize == foptsize check. Reject fingerprints where any option has zero length, or where an MSS option has length less than 4, at add time rather than trusting these values in the packet matching hot path.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-115794

Alarm data length not validated against received frame length

P-Net before 1.0.3 passes the application alarm callback a data length derived from the variable part length field of a received RTA alarm frame without checking it against the length of the received frame. A short frame can make the callback receive a length of up to 65507 bytes. An application that copies the reported number of bytes reads past the end of the receive buffer. The attacker must have established an Application Relationship and requires ADJACENT network access. Applications that do not use the alarm data are not affected.

CVSS 4.0 · 2.3 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-118581

NoSQL injection via mismatched BSON size prefix in raw document splice to the wire protocol

A BSON encoding component of the MongoDB Java Driver does not verify that an externally supplied raw document's self-declared length agrees with the extent of the byte range it is given before that range is copied into an outgoing database command. An application that wraps untrusted raw bytes in such a document and uses it as part of a command can therefore emit a structurally inconsistent message, causing the database to interpret attacker-supplied trailing content as additional fields of the surrounding command. No authentication to the driver or database is required beyond the ability to influence those bytes through the victim application, and no user interaction is needed. The result is unintended modification of the command actually executed, which can alter the data read or written under the application's credentials.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-0553

Gnutls: incomplete fix for cve-2023-5981

A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.

CVSS 3.1 · 7.5 High EPSS 1.6% KEV · Not listed
Products
CVE-2023-5981

Gnutls: timing side-channel in the rsa-psk authentication

A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.

CVSS 3.1 · 5.9 Medium EPSS 1.4% KEV · Not listed
Vendors
Debian Fedoraproject Gnu and 1 more
Products
CVE-2026-33846

Gnutls: gnutls: denial of service via heap buffer overflow in dtls handshake fragment reassembly

A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption.

CVSS 3.1 · 7.5 High EPSS 1.3% KEV · Not listed
Vendors
Products
CVE-2026-114597

Improper handling of length parameter inconsistency in EPICS Base

In EPICS Base release 7.0.10 and prior, an insufficient validation of element or length values in a network message can cause the application to read beyond the bounds of an allocated buffer. This may lead to denial of service and could expose adjacent memory contents.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Products
CVE-2026-102718

Out-of-bounds read in the NetX Duo SNMP OID parser via a multi-byte BER length

In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, the SNMP agent's OID parser uses a multi-byte BER length from the request without checking it against the bytes present, and reads past the end of the packet buffer. A remote, unauthenticated attacker can send a crafted SNMP request that makes the agent read adjacent memory into its OID state, faulting the agent on targets with memory protection.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119277

MariaDB Connector/J: Rogue server can make the client read past the packet through server-declared lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, decoders for OK packet session-state blocks, column definition packets, text row data, or binary row data used server-declared lengths without confirming that the requested bytes remained in the receive buffer. The decoders could position reads, create sub-buffers, or decode strings beyond the packet boundary. A malicious or compromised server, or a machine-in-the-middle attacker, could trigger unchecked ArrayIndexOutOfBoundsException or IllegalArgumentException failures inside JDBC calls and terminate connection handling. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-119279

MariaDB Connector/J: Length-encoded integers larger than Integer.MAX_VALUE were truncated before being used as lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.10, the ReadableByteBuf.readLength() and ReadableByteBuf.readIntLengthEncodedNotNull() methods narrowed the protocol's unsigned 8-byte length-encoded integer to a Java int without checking that the value fit a non-negative integer. Values above Integer.MAX_VALUE could wrap to a negative or unrelated length that downstream allocation and read paths used. A malicious or compromised server, or a machine-in-the-middle attacker, could trigger NegativeArraySizeException, out-of-bounds failures, or oversized allocation behavior in client connection handling. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.10.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-116584

Seroval `fromJSON`/`fromCrossJSON` denial of service via unvalidated array node length

Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. From 1.4.1 until 1.6.8, fromJSON and fromCrossJSON do not require an array node's element list to be an actual array. A small crafted payload can supply an attacker-controlled length that determines memory allocation and decoder iterations independently of payload size, allowing an unauthenticated request to exhaust the process or block its thread. This issue is a residual bypass of the remediation for CVE-2026-23957. This issue is fixed in version 1.6.8.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-114646

NoSQL command injection via mismatched raw BSON length prefix written verbatim to the wire

A data-validation flaw exists in the BSON handling and binary serialization path of the MongoDB C# Driver. When an application constructs a raw or lazy BSON document object from externally supplied binary data, the driver does not verify that the size quantity declared inside that data matches the amount of data actually provided, and it copies the data onto the wire unchanged. An unauthenticated party who can supply binary content to such an application can thereby cause additional elements to be inserted into, or existing elements to be removed from, the database command the application issues, without needing any database credentials of their own. This can result in unauthorized modification of stored data and disclosure of data outside the intended scope of the application's request, bounded by the database privileges the application itself holds.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-105960

HMS Networks PEAK-System PCAN Windows drivers Improper Handling of Length Parameter Inconsistency

PEAK-System PCAN contains a vulnerable operation involving a variable-length receive-record copy. The driver uses a requested or queued record count without sufficiently capping the copy to the actual caller-supplied output length.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-119280

MariaDB Connector/J : XA recover() trusted server-supplied gtrid and bqual lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the MariaDbPoolConnection.recover() and MariaDbPoolPinnedConnection.recover() implementations trusted the gtrid_length and bqual_length columns returned by XA RECOVER. The methods allocated and split Xid byte arrays without validating the lengths against Xid.MAXGTRIDSIZE, Xid.MAXBQUALSIZE, or the actual data payload. A malicious or compromised server, or a machine-in-the-middle attacker, could cause large allocations, NegativeArraySizeException, or ArrayIndexOutOfBoundsException during XA recovery. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
CVE-2026-119276

MariaDB Connector/J: Rogue server can drive large heap allocations from server-declared lengths in OK packets

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, when CLIENT_SESSION_TRACK was negotiated, the OkPacket.parse() and OkPacket.parseWithInfo() paths allocated byte arrays using server-declared lengths for the OK packet info field and session-state variable names and values before confirming that the bytes remained in the packet. A malicious or compromised server, or a machine-in-the-middle attacker, could send a small OK packet declaring a much larger length and repeatedly force attacker-controlled heap allocations before the subsequent copy failed. This could create garbage-collection pressure or an OutOfMemoryError in the client application. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-119278

MariaDB Connector/J: Rogue server can crash the client during caching_sha2_password authentication

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7 and 3.4.5, during caching_sha2_password authentication, the authentication-more-data response was treated as a length-encoded byte array, memory was allocated from the server-declared length, and authResult[0] was accessed without ensuring a byte existed. A malicious or compromised server, or a machine-in-the-middle attacker, could declare a very large length or send an empty response before any password was transmitted. The malformed packet could cause excessive allocation or an unchecked ArrayIndexOutOfBoundsException escaping from DriverManager.getConnection(). This issue is fixed in versions 3.3.7 and 3.4.5.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-63959

usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-89480

nvme-tcp: reject a read that transferred too few bytes

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68471

wifi: ieee80211: validate MLE common info length

In the Linux kernel, the following vulnerability has been resolved: wifi: ieee80211: validate MLE common info length ieee80211_mle_common_size() uses the first common-info octet as the common information length for all known MLE types. However, ieee80211_mle_size_ok() only validates that octet for Basic, Probe Request, and TDLS MLEs. Reconfiguration MLEs also skipped the length octet when calculating the minimum common size, and Priority Access MLEs skipped validation of the advertised common information length. Account for the Reconfiguration common-info length octet and validate the advertised common information length for all known MLE types. Keep unknown-type handling unchanged. [remove now misleading comment]

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-63940

KVM: SEV: Ignore Port I/O requests of length '0'

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products