Search vulnerabilities

Results 135

Export CSV
CVE-2026-133221

Org.keycloak.authentication: pending required actions (e.g. configure_totp) can be bypassed via post to login-actions/consent without a valid session_code

A flaw was found in Keycloak. An authenticated remote user with a pending required security action, such as configuring multi-factor authentication (MFA), can bypass the mandatory action by submitting a specially crafted request to the consent endpoint without a valid session code. Keycloak incorrectly interprets the submission as a page refresh and completes the authentication process, allowing the user to access the application without fulfilling the required security policies.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-99794

Bluetooth: L2CAP: Reject signalling responses in invalid states

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Reject signalling responses in invalid states A peer can send configuration messages while an incoming channel is in BT_CONNECT2, before the security or deferred accept gate has completed. A configuration response can then promote the channel to BT_CONNECTED. Configuration responses can also act on channels that are closing, and a late connection response can move a disconnecting channel back to BT_CONFIG. Accept connection responses only while waiting in BT_CONNECT. Answer configuration requests in BT_CONNECT2, but defer our own request until BT_CONFIG so configuration cannot complete before the gate. Ignore configuration responses outside BT_CONFIG and BT_CONNECTED, and only complete configuration in BT_CONFIG.

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-106024

Mongoose before 7.24 WebSocket Frame Validation Bypass via ws.c

Mongoose Embedded Web Server / Networking Library before 7.24 contains a WebSocket fragmentation validation vulnerability that allows remote attackers to spoof message metadata by sending a single CONTINUATION frame with FIN=1 as the first data frame instead of a required TEXT/BINARY start frame, violating RFC 6455 sequencing rules. Attackers can craft this malformed frame to make mg_ws_cb() in src/ws.c misinterpret the first byte of payload as saved FIN/opcode flags, causing the application to receive a dispatched MG_EV_WS_MSG event with attacker-controlled flags and data truncated by one byte without closing the connection.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76516

ClamAV XAR GZIP Parser Vulnerability Leading to Denial of Service

A vulnerability in the eXtensible ARchive (XAR) GZIP file parser for ClamAV could allow an unauthenticated, remote attacker to exceed the configured MaxFileSize and cause a DoS condition on an affected device. This vulnerability is due to inefficiencies when parsing specifically formatted files with the XAR GZIP file parser. An attacker could exploit this vulnerability by by sending a crafted XAR GZIP file to be scanned. A successful exploit could allow the attacker to effectively cause the ClamAV to exceed the MaxFileSize and potentially get caught in an infinite loop, causing a DoS condition.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99793

Bluetooth: L2CAP: Only accept connection responses to outstanding requests

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Only accept connection responses to outstanding requests An outgoing channel waits in BT_CONNECT until security and the feature mask exchange complete, and only then sends its connection request. A peer can answer it before that with a connection response matching our source CID. The channel then moves to BT_CONFIG, completes configuration and becomes connected before security has completed. If security then fails, l2cap_security_cfm() leaves the connected channel alone, so it stays up on a link that did not reach the required security level. A connection response with a zero source CID is matched by identifier. Another channel can hold the same identifier for a response it still has to send, so the lookup can pick the wrong channel. Only accept a connection response while our request is outstanding, and only look at such channels when matching by identifier.

CVSS 3.1 · 5.0 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43974

gun HTTP/1.1 client accepts unsolicited 101 Switching Protocols response allowing server-driven protocol hijack and OOM

Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response. In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode. A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM. This issue affects gun: from 2.0.0-pre.1 before 2.4.0.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
Gun
CVE-2026-28248

SEV Firmware Workflow Flaw Enables Guest Attestation Bypass

Improper enforcement of behavioral workflow in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to potentially launch a guest whose attestation report contains an ID key digest for an ID block that doesn't match the guest's measurement resulting in loss of integrity.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Amd
CVE-2026-128032

OpenMage magento-lts before 20.18.2 Payment Bypass via Free Payment Method

OpenMage magento-lts before 20.18.2 and 21.0.0-beta1 before 21.0.0-beta3 accepts the free (No Payment Information Required) payment method on orders with a non-zero total because the zero-total check runs only when payment data is imported. An API user with cart permissions can select free via cart_payment.method while the total is zero, raise it with cart_coupon.remove, and submit cart.order to place an unpaid full-price order.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-21170

Improper enforcement of behavioral workflow in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to write arbitrary files with Smart Switch privilege.

CVSS 4.0 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-115846

IKEv2: IKE_INTERMEDIATE exchange bypass error

The Libreswan IKEv2 state machine did not verify that an IKE_INTERMEDIATE exchange was required to satisfy the addke= PostQuantum algorithm component of the exchange. A connecting client could (maliciously or by implementation error) skip the IKE_INTERMEDIATE exchange and start an IKE_AUTH exchange prematurely. The result is as if the addke= option had not been specified, and such connections are only protected by the classic key exchange algorithm (such as P-256 or Curve25519), allowing "store now, decrypt later" attacks once a quantum computer becomes available. Only connections with the addke= keyword in the ike= and/or esp= configuration option are affected. PostQuantum Hybrid Key Exchange support was added in version 5.4.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-109231

Germanized for WooCommerce <= 4.1.4 - Authenticated (Subscriber+) Unauthorized Access of Private Data via Activation Token Reuse via Activation Token Reuse After Email Change

The Germanized for WooCommerce plugin for WordPress is vulnerable to Unauthorized Access of Private Data via Activation Token Reuse in versions up to, and including, 4.1.4. This is due to the `on_user_email_changed` hook — which is responsible for rotating the activation token and recording a pending-email-change marker on an unactivated Customer account — only being registered inside the `is_double_opt_in_login_enabled()` branch when "Disable login for unactivated customers" is set to Yes, leaving the original `?activate=` token valid and entirely unbound to the email address it was issued for when that setting is No. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change their account email to a victim's billing email via the standard `/my-account/edit-account/` form and then redeem their original activation token through `customer_account_activate()`, triggering `link_customer_past_orders()` to reassign any matching guest order to the attacker's account and exposing the original buyer's billing name, street address, phone number, and purchased items on the attacker's My Account order page. Exploitation requires the site to have double opt-in enabled with "Disable login for unactivated customers" explicitly set to No (a non-default configuration), public customer registration enabled, and the original activation token redeemed within its one-day expiry window.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
CVE-2026-64506

wifi: rtw89: correct drop logic for malformed AMPDU frames

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: correct drop logic for malformed AMPDU frames The previous commit aims to fix issue caused by malformed AMPDU frames. But the drop logic fails to deal with the first AMPDU packet paired with certain range of sequence number, and leads to unexpected packet drop. It is more likely to encounter this failure when there are busy traffic during rekey process and could lead to disconnection from the AP. Fix this by adding a initial state judgement and only reset status during pairwise rekey.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124576

BeikeShop Guest Order Lookup OrderRepo.php getOrderByNumber behavioral workflow

A security flaw has been discovered in BeikeShop up to 2.0.0.31. Impacted is the function OrderRepo::getOrderByNumber of the file beike/Repositories/OrderRepo.php of the component Guest Order Lookup. Performing a manipulation of the argument order_number results in enforcement of behavioral workflow. The attack can be initiated remotely. Upgrading to version 2.0.0.32 is recommended to address this issue. The patch is named 6cf25f8c15d27d1ff14a848faf645c94d20ba5f1. It is recommended to upgrade the affected component.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-123788

chenyme grok2api STT Billing voice_ws_handler.go behavioral workflow

A security vulnerability has been detected in chenyme grok2api up to 3.1.6. The impacted element is an unknown function of the file backend/internal/transport/http/inference/voice_ws_handler.go of the component STT Billing. The manipulation leads to enforcement of behavioral workflow. The attack may be initiated remotely. Upgrading to version 3.1.7 is sufficient to resolve this issue. The identifier of the patch is 7ad0f791f0a9eb5a0ddfe38ac4dfcef01e19a6d4. Upgrading the affected component is recommended.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124566

fushengqian fuint Alipay Callback ClientPayController.java aliPayCallback behavioral workflow

A vulnerability was detected in fushengqian fuint up to 36cc31b08d77facc94e8959afa02224891b4fe5f. This vulnerability affects the function aliPayCallback of the file ClientPayController.java of the component Alipay Callback Handler. Performing a manipulation results in enforcement of behavioral workflow. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-119744

Cendio ThinLinc Improper Authentication via Web Access

Cendio ThinLinc contains an improper authentication vulnerability in its browser-based web client (tlwebaccess) that allows an authenticated attacker to impersonate any other user, including root, by exploiting flaws in multi-step authentication flows such as one-time passwords, login banners, or expired password prompts. Attackers can leverage this authentication bypass during the multi-step login process to gain unauthorized access to other user accounts, including administrative privileges, in versions from 4.1.0 through 4.20.0.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-93325

Bake filesystem entitlement consent is skipped under --progress=rawjson in Docker Buildx

Buildx bake requires the user to grant entitlements with --allow or an interactive prompt before a build reaches outside the working directory. Under --progress=rawjson that consent step is skipped.

CVSS 4.0 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-16103

Keycloak-services: keycloak-services: incomplete fix for ciba brute-force lockout bypass at token redemption

A flaw was found in the keycloak-services component of Keycloak. This issue is an incomplete fix for CVE-2026-9798, where brute-force protection checks were added to the Client-Initiated Backchannel Authentication (CIBA) initiation handler but were omitted from the token redemption handler. This allows an attacker with valid client credentials to obtain access and refresh tokens for a user account that has been locked due to brute-force protection, provided the authentication request was started before the lockout occurred and was approved by the user.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-46059

KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN For guests with NRIPS disabled, L1 does not provide NextRIP when running an L2 with an injected soft interrupt, instead it advances the current RIP before running it. KVM uses the current RIP as the NextRIP in vmcb02 to emulate a CPU without NRIPS. However, after L2 runs the first time, NextRIP will be updated by the CPU and/or KVM, and the current RIP is no longer the correct value to use in vmcb02. Hence, after save/restore, use the current RIP if and only if a nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the same treatment, as it's the same logic, just for a narrower use case. [sean: give soft_int_next_rip the same treatment]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-43477

drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL

In the Linux kernel, the following vulnerability has been resolved: drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE before enabling TRANS_DDI_FUNC_CTL. Personally I was only able to reproduce a hang (on an Dell XPS 7390 2-in-1) with an external display connected via a dock using a dodgy type-C cable that made the link training fail. After the failed link training the machine would hang. TGL seemed immune to the problem for whatever reason. BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL as well. The DMC firmware also does the VRR restore in two stages: - first stage seems to be unconditional and includes TRANS_VRR_CTL and a few other VRR registers, among other things - second stage is conditional on the DDI being enabled, and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE, among other things So let's reorder the steps to match to avoid the hang, and toss in an extra WARN to make sure we don't screw this up later. BSpec: 22243 (cherry picked from commit 93f3a267c3dd4d811b224bb9e179a10d81456a74)

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products