Search vulnerabilities

Results 85

Export CSV
CVE-2026-133250

@fastify/middie vulnerable to path-scoped middleware bypass via request path matching mismatches

@fastify/middie is the middleware engine for the Fastify web framework. In versions up to and including 9.3.7, middie matches path-scoped middleware against its own reading of the request path, which can differ from the path Fastify's router uses to dispatch the request. When the two disagree, the router can route a request to a handler covered by a middleware mount while middie skips that middleware, so an unauthenticated client reaches a handler that an authentication, authorization, or rate-limiting middleware was meant to protect, with no special configuration required. The mismatch is triggered by empty parameter or wildcard values, request targets that do not begin with a slash, and literal percent characters in a mount path. The issue is fixed in @fastify/middie 9.3.8, and users should upgrade to 9.3.8 or later.

CVSS 3.1 · 9.1 Critical EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-133273

@fastify/swagger-ui vulnerable to documentation authentication bypass via the unprotected /static route

@fastify/swagger-ui is the plugin that serves Swagger UI documentation for Fastify applications. In versions 2.1.0 through 6.1.4, the authentication hooks that applications register to protect the documentation are applied to every route the plugin adds except the bundled static asset instance. When the option that serves bundled UI files from a local directory is enabled, that instance exposes every file in the directory without credentials, so a specification file an operator meant to keep behind the documentation login becomes reachable by an unauthenticated client who knows or guesses its name. Access is read-only and limited to files in that directory. The issue is fixed in @fastify/swagger-ui 6.1.5, which applies the same authentication hooks to the static asset route, and users should upgrade to 6.1.5 or later.

CVSS 3.1 · 3.7 Low EPSS n/a KEV · Not listed
Vendors
CVE-2026-133312

@fastify/rate-limit vulnerable to failed-login limit bypass via a race condition in the documented flow

@fastify/rate-limit is the rate-limiting plugin for the Fastify web framework. Starting in version 11.1.0, the plugin documented a manual flow for limiting failed login attempts that peeks at the limiter, runs the password check, and consumes a slot only on failure. Because the peek and the consume are two separate store operations with the password check in between, concurrent requests can all pass the peek before any slot is consumed, so in versions 11.1.0 through 11.2.2 a burst of requests runs far more failed attempts than the configured limit, and the sequential path also allowed one attempt more than configured. The default per-request limiter is not affected. The issue is fixed in @fastify/rate-limit 11.3.0, which makes the manual flow atomic by reserving a slot in a single operation and refunding it only on success, and users should upgrade to 11.3.0 or later.

CVSS 3.1 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
CVE-2026-133867

@fastify/express vulnerable to middleware bypass via RegExp mount paths under parameterized prefixes

@fastify/express is a compatibility layer that lets Express middleware run inside the Fastify web framework. In versions 4.0.7 through 4.0.9, the plugin does not rewrite regular-expression mount paths to account for a parameterized plugin prefix, so when middleware is mounted with a regular expression inside a plugin registered under a parameterized prefix, the Express matcher treats the prefix parameter as literal text and never matches the real request path. As a result, Express silently skips that middleware while Fastify still runs the route handler, so an application that relies on regular-expression mounted middleware for authentication or authorization inside a parameterized-prefix plugin exposes protected routes to unauthenticated clients. No special configuration is required beyond a parameterized prefix and a regular-expression mount. The issue is fixed in @fastify/express 4.0.10, and users should upgrade to 4.0.10 or later.

CVSS 3.1 · 9.1 Critical EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-124626

@fastify/express vulnerable to middleware bypass via empty route parameters and wildcards

@fastify/express is a compatibility layer that lets Express middleware run inside the Fastify web framework. In versions 4.0.5 through 4.0.9, the plugin matches path-scoped Express middleware with a matcher that requires a non-empty value for a dynamic segment, while Fastify's router accepts an empty parameter or wildcard value. When a route and an Express middleware mount share a dynamic pattern, a request with an empty segment matches the Fastify route and runs the handler while the middleware mounted on that pattern is skipped, so on a scoped mount an unauthenticated request can reach a protected handler. No special configuration is required, and the practical impact depends on what the empty value selects in the application. The issue is fixed in @fastify/express 4.0.10, and users should upgrade to 4.0.10 or later.

CVSS 3.1 · 9.1 Critical EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-129504

@fastify/express vulnerable to path-scoped middleware bypass via prefix and mount path join mismatch

@fastify/express is a compatibility layer that lets Express middleware run inside the Fastify web framework. In versions 4.0.0 through 4.0.9, the plugin joins a path-scoped middleware's mount path to the Fastify plugin prefix by string concatenation, so when the plugin prefix ends with a slash or the mount path omits its leading slash, the resulting Express mount path does not line up with the route the Fastify router serves. Express then fails to match and passes the request on while the Fastify router still dispatches the route, so the middleware is silently skipped. An application that uses path-scoped Express middleware for authentication or authorization inside a prefixed plugin can expose protected routes to unauthenticated clients, with no crafted request and no non-default option required, and string, array, and regular-expression mount paths are all affected. The issue is fixed in @fastify/express 4.0.10, and users should upgrade to 4.0.10 or later.

CVSS 3.1 · 9.1 Critical EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-129850

@fastify/express vulnerable to path-scoped middleware bypass via Unicode case folding

@fastify/express is a compatibility layer that lets Express middleware run inside the Fastify web framework. In versions 4.0.0 through 4.0.9, when Fastify routing is configured to be case-insensitive, the router folds the request path to lower case in a way that maps certain non-ASCII Unicode characters to ASCII letters, but @fastify/express matches Express mount paths against the decoded path without applying the same folding. The two disagree, so a request that spells a letter of a mount path with an equivalent Unicode character is routed to the protected handler while the path-scoped middleware mounted on that path never matches and is skipped. An unauthenticated client can therefore reach a handler that an authentication, authorization, or rate-limiting middleware was meant to protect, though only when the application enables case-insensitive routing and the mount path contains an affected letter. The issue is fixed in @fastify/express 4.0.10, and users should upgrade to 4.0.10 or later.

CVSS 3.1 · 7.4 High EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-133120

@fastify/express vulnerable to path-scoped middleware bypass via request URL decoding and normalization mismatches

@fastify/express is a compatibility layer that lets Express middleware run inside the Fastify web framework. In versions before 4.0.10, the plugin passes Express a request URL that does not always match the path Fastify's router dispatched, so path-scoped Express middleware can be skipped while the route handler still runs. Several request forms trigger the mismatch, including percent-decoding that rewrites a backslash to a slash or double-decodes an encoded percent sign, and a request target that begins with an asterisk, so the middleware and the handler disagree on the path or on parameter and query values. An unauthenticated client can therefore reach a handler that an authentication, authorization, or rate-limiting middleware was meant to protect, with no special configuration required. The issue is fixed in @fastify/express 4.0.10, and users should upgrade to 4.0.10 or later.

CVSS 3.1 · 9.1 Critical EPSS n/a KEV · Not listed
Vendors
Products
CVE-2026-133111

@fastify/http-proxy vulnerable to Cross-Site WebSocket Hijacking via dropped Origin header

@fastify/http-proxy is a Fastify plugin that proxies HTTP and WebSocket traffic to an upstream server. In versions from 7.1.0 up to but not including 11.6.10, when the plugin is registered with websocket support enabled, it opens the upstream WebSocket connection with a header set built by the default header rewriter, which forwards the client cookie but never sets the upstream origin option, so the browser origin header is dropped while the authenticating cookie is forwarded. Many WebSocket servers defend against cross-site hijacking by checking the origin and treat a missing origin as a trusted non-browser client, so behind the proxy that check never sees the foreign origin. A malicious page visited by a logged-in user can therefore open a WebSocket through the proxy to an upstream that authenticates the handshake with a cookie, and read or send messages on the user's behalf. The issue is fixed in @fastify/http-proxy 11.6.10, and users should upgrade to 11.6.10 or later. As a workaround, provide a header rewriter that sets a correct origin, or validate the origin before the proxy.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-121192

@fastify/proxy-addr vulnerable to IP spoofing via ignored IPv6 zone identifier

@fastify/proxy-addr determines which network hops are trusted proxies and backs Fastify's trustProxy setting, so that forwarded headers can be believed. In versions 3.0.0 through 5.1.2, when trustProxy is configured with a zoned IPv6 link-local address, the trust comparison checks only the address bits and ignores the zone identifier, so a host on another link of a multi-homed server that carries the same link-local address is trusted as well. Such an attacker can spoof the X-Forwarded-For, X-Forwarded-Host and X-Forwarded-Proto headers, making the client IP, host and protocol reported by Fastify attacker-chosen values and defeating IP allowlists, rate limiting and audit logging. Exploitation requires a multi-homed server whose trustProxy is a zoned link-local address and an attacker directly on one of its other links; the default configuration and global, private or loopback trust entries are not affected. The issue is fixed in @fastify/proxy-addr 5.1.3, and users should upgrade to 5.1.3 or later. As a workaround, avoid trusting a zoned link-local address on a multi-homed host and trust a global, private or loopback proxy address instead.

CVSS 3.1 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-110710

@fastify/multipart vulnerable to Denial of Service via temporary file leak after client disconnect

@fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 3.0.0 through 10.1.3, temporary files written by the saveRequestFiles helper are removed only by a response hook that runs when the response finishes or errors. When a client completes an upload and then disconnects before the handler writes the reply, for example while the handler scans, hashes or forwards the file, the response only emits a close event, the cleanup hook never runs, and the saved files are left on disk. An unauthenticated client can repeat this cheaply to exhaust disk space and deny service to applications that save uploaded files to disk. The issue is fixed in @fastify/multipart 10.1.4, and users should upgrade to 10.1.4 or later. As a workaround, avoid saving request files for untrusted clients, or clean the saved files from a close handler on the raw response so removal also happens when the client disconnects.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-124289

@fastify/multipart vulnerable to arbitrary file write via type confusion in saveRequestFiles()

@fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 7.4.0 through 10.1.8, when the plugin is registered with the attachFieldsToBody option, the saveRequestFiles helper treats any object in the parsed request body that carries truthy file and buffer properties as an uploaded file. An unauthenticated client can forge such an object through a plain JSON request or a JSON-typed multipart field, so attacker-chosen bytes are written to the temporary directory while upload hooks and the file count and size limits are skipped, and the saved entry keeps the attacker's filename verbatim instead of being reduced to its basename. Because that filename can contain parent directory segments, applications that use it as a write destination, as the project README example does, are exposed to an arbitrary relative-path file write from a single request. The issue is fixed in @fastify/multipart 10.1.9, and users should upgrade to 10.1.9 or later. As a workaround, call saveRequestFiles only after confirming the request is multipart, and reduce each returned filename to its basename or validate it against an allowlist before using it as a destination.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-128835

@fastify/busboy vulnerable to Denial of Service via a multipart part with unterminated headers

@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, a multipart part whose header block is never terminated before the next boundary is counted by the vendored Dicer parser as an open part that never ends, so the parser emits neither a finish nor an error event and the request hangs. A single unauthenticated request of roughly one hundred bytes triggers the stall, and through @fastify/multipart the hung handler is not released when the client disconnects, so repeated requests leak handlers and whatever resources they hold, such as files, database connections and concurrency slots, until the process is restarted. The same parser is reached by the formData methods of undici versions 5.25.3 through 6.7.0. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. As a workaround, configure Fastify's handler timeout so hung handlers are eventually terminated and their resources released.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128842

@fastify/busboy vulnerable to Denial of Service via URL-encoded field size-limit bypass

@fastify/busboy is a streaming parser for multipart and url-encoded form data used by Fastify. In versions 1.0.0 through 3.2.5, the url-encoded parser stops accumulating a field only when the decoded length exactly equals the configured per-field size limit, and a malformed percent escape is passed through verbatim by the decoder, so the decoded length can jump from just below the limit to just above it and skip that equality check. The parser then keeps buffering the field in memory until the next delimiter or the end of the request, so a single unauthenticated url-encoded field or field name can grow to the size of the whole request body regardless of a much smaller configured per-field limit, with memory use bounded only by the independent whole-request body limit. The issue is fixed in @fastify/busboy 3.2.6, which clamps a field as soon as the decoded length reaches or exceeds the limit, and users should upgrade to 3.2.6 or later. As a workaround, set a conservative whole-request body limit so the per-field overshoot cannot exceed it.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128846

@fastify/busboy vulnerable to multipart file/field type confusion via chunk-dependent header parsing

@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 3.2.1 through 3.2.5, the parser can interpret the same multipart bytes differently depending on how they are split across socket reads: when the sequence that terminates a part's header block arrives split exactly at the configured header size limit, an off by one error drops the final header line, so a part declared as a binary file attachment is emitted as an ordinary text field instead of a file. A remote client controls both the multipart body and the header padding needed to reach the boundary and can influence segmentation, so an application that applies upload validation such as malware scanning or extension checks only to file events while trusting plain field values may process the payload through the wrong path. The parser level type confusion is fully reproducible, while the downstream validation bypass depends on the application. The issue is fixed in @fastify/busboy 3.2.6, which tracks how many terminator bytes were actually buffered when the limit is reached so a split terminator no longer corrupts the final header, and users should upgrade to 3.2.6 or later. As a workaround, apply the same validation to field values as to file uploads rather than treating file events as a trust boundary.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-124724

@fastify/busboy vulnerable to Denial of Service via truncated multipart part past the parts limit

@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, when a request reaches the configured limit on the number of multipart parts, each further part is skipped without attaching an error listener to the skipped part stream. If the request body ends in the middle of such a skipped part, the vendored Dicer parser emits an error on that stream, and because nothing is listening Node.js raises an unhandled error event and the process exits. A single crafted unauthenticated request is therefore enough to crash the server. The bug is latent in the parser on its own and was first demonstrated through @fastify/multipart versions 10.1.2 through 10.1.4, which keep feeding the request body to the parser after a limit error, and it affects any consumer that sets a finite parts limit and parses request bodies that can be terminated early. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. There is no complete application level workaround because the crash happens inside the parser before application code runs, though consumers that set a finite parts limit should also attach an error listener to the parser stream.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-112362

@fastify/express vulnerable to path-scoped middleware bypass via absolute-form request targets

@fastify/express is a Fastify plugin that runs Express middleware inside Fastify. In versions 4.0.5 through 4.0.8, when Fastify runs with the non-default ignoreDuplicateSlashes option enabled, the plugin matches path-scoped Express middleware against a URL whose duplicate-slash normalization has also collapsed the separator after an absolute-form request target's scheme, so Fastify's router resolves the request to the scoped path and runs the handler while the Express layer no longer sees that path. As a result, a request using an absolute-form target can reach a handler on a scoped route such as an admin path while the middleware for authentication, authorization, or rate limiting is skipped. An unauthenticated attacker needs only the non-default ignoreDuplicateSlashes option to be enabled. The issue is fixed in @fastify/express 4.0.9, and users should upgrade to 4.0.9 or later. As a workaround, enforce authentication in a Fastify hook such as preHandler that runs after the router resolves the request, or leave ignoreDuplicateSlashes at its default.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-120214

@fastify/http-proxy vulnerable to prefix escape via percent-encoded backslash dot-segments

@fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 11.6.0 through 11.6.2, the destination validation normalizes literal backslashes before it percent-decodes the request path, so a path that encodes its backslashes and dot-segments survives the dot-segment check and is only turned into backslash and double-dot sequences after that check has passed. When the upstream resolves on a platform that treats a backslash as a path separator, the forwarded request walks out of the configured proxy prefix and reaches a sibling location on the upstream. An unauthenticated remote attacker can use this to retrieve upstream resources outside the intended prefix, so the impact is confidentiality only, and exploitation depends on the upstream's path handling. The issue is fixed in @fastify/http-proxy 11.6.3, and users should upgrade to 11.6.3 or later. This is a follow-up to the earlier prefix-escape fix, which did not account for the encoded-backslash form.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-120213

@fastify/http-proxy vulnerable to prefix escape via decoded route parameters

@fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 9.0.0 through 11.6.5, when an application uses parameterized prefix and rewritePrefix options to pin clients to a fixed upstream path, the plugin substitutes URL-decoded route parameters into rewritePrefix without re-encoding them. A parameter value that encodes a path separator together with a fragment or query delimiter therefore decodes into real separators and delimiters that inject extra upstream path segments and strip the mandatory suffix the rewritePrefix was meant to enforce, without using any dot-dot traversal. An unauthenticated remote attacker can use this to reach upstream locations outside the intended prefix, leading to path-restriction bypass and, depending on the upstream, server-side request forgery or authorization bypass in the proxied service. The issue is fixed in @fastify/http-proxy 11.6.6, and users should upgrade to 11.6.6 or later. There is no workaround other than upgrading.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-117518

@fastify/reply-from vulnerable to path traversal via backslash dot-segment prefix escape

@fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP server. In versions up to and including 12.8.0, the plugin validated proxy paths against forward-slash dot-segments only and then built the target with the WHATWG URL parser, which normalizes a backslash and its percent-encoded form to a forward slash on the http, https, ws, and wss schemes. A path that uses backslash dot-segments therefore bypasses the traversal check and resolves to a different upstream path, so an application that scopes proxying to an upstream prefix, or relies on route guards in front of the forwarding call, can have an unauthenticated request escape the intended prefix and reach other upstream endpoints. The resulting access to unintended upstream resources is primarily a confidentiality impact with limited integrity impact. The issue is fixed in @fastify/reply-from 12.8.1, where the path is normalized and any segment resolving to a single or double dot, along with control characters and ambiguous whitespace, is rejected before the URL is constructed, and users should upgrade to 12.8.1 or later. There is no workaround other than upgrading.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors